We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green PCB adapter board with 29pin SAS connector, 22pin SATA connector and power port

SMUGDESK

SMUGDESK SFF8482 SAS 29Pin to 7+15 22Pin SATA HDD RAID Adapter

SKU CH-WJ1W-FC7X1

Converts SFF8482 29pin SAS to 7+15 22pin SATA with an integrated controller chipset and dedicated power port for RAID arrays

  • Converts 29pin SAS to standard 22pin SATA for drive compatibility
  • Integrated SAS controller chipset delivers stable RAID signal transmission
  • Dedicated power port supplies reliable power for high-performance drives
  • Supports SAS and SATA HDDs or SSDs for flexible storage arrays
  • Compact plug-and-play design works with Windows, Linux and RAID controllers

SAS adapter for RAID storage

This SMUGDESK adapter converts an SFF8482 29pin SAS interface to a standard 7+15 22pin SATA connection for hard disk drives. An integrated SAS controller chipset provides stable signal transmission compatible with RAID configurations. A dedicated power port supplies sufficient current for high-performance SAS and SATA drives. The compact PCB design supports plug-and-play installation on Windows and Linux systems.

Suited for server expansion, not consumer builds

System builders expanding enterprise storage arrays or configuring RAID backups in server chassis will benefit from the controller chipset and independent power delivery. Industrial storage integrators requiring reliable SAS-to-SATA conversion for mixed drive deployments are also well served. Home users adding a single desktop drive or builders without a SAS host port should look elsewhere, as the adapter requires a native SAS connection and serves no purpose on standard consumer motherboards.

Handles mixed RAID arrays, limited by host port

The adapter comfortably handles multiple SAS and SATA hard drives configured in RAID arrays where the host controller presents an SFF8482 29pin port. It runs out of headroom when the host cannot supply adequate power through the dedicated port or when the backplane lacks the physical 29pin SAS interface required for connection.

Highlights

  • Converts 29pin SAS to standard 22pin SATA for drive compatibility
  • Integrated SAS controller chipset delivers stable RAID signal transmission
  • Dedicated power port supplies reliable power for high-performance drives
  • Supports SAS and SATA HDDs or SSDs for flexible storage arrays
  • Compact plug-and-play design works with Windows, Linux and RAID controllers

Specifications

No published specifications for this item yet.

Questions about this item

What type of host interface must my controller provide for this SFF8482 29pin adapter?

Your RAID controller or HBA needs an SFF8482 29pin SAS port; the adapter plugs directly into that connector.

Can I keep using my existing SATA hard drives with this SAS 29pin to 22pin SATA adapter?

Yes, the builtin SAS controller chipset supports both SAS HDDs and SATA HDDs or SSDs on the 7+15pin SATA side.

How do I verify the independent power port is delivering power after I connect a drive?

The drive should spin up and appear in the RAID BIOS or operating system; no separate LED is mentioned for the power port.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.