We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
SMUGDESK SFF8087 36Pin to 4 SATA 7Pin breakout cable with shielded wiring

SMUGDESK

SMUGDESK SFF8087 36Pin to 4 SATA 7Pin Breakout Cable

SKU CH-9R1M-1X720

Converts a 36-pin SFF8087 MiniSAS 4i port into four SATA 7-pin connectors for multidrive server expansion

  • Converts single 36-pin SFF8087 MiniSAS 4i port to four SATA 7-pin ports for multidrive expansion
  • Delivers stable highspeed SAS to SATA data transmission for HDDs, SSDs, RAID controllers and storage backplanes
  • Durable internal wire harness with anti-interference shielding for consistent longterm server performance
  • Plug-and-play design for easy integration into mainstream PC, server and NAS storage systems
  • Compact internal layout optimizes cable management in rackmount servers and small-form-factor enclosures

MiniSAS SFF8087 to 4 SATA Cable

This internal breakout cable converts a single 36pin SFF8087 MiniSAS 4i host port into four standard SATA 7pin connectors. It enables reliable multidrive connectivity between SAS controllers and SATA storage devices for enterprise servers, RAID arrays and highcapacity NAS upgrades. The shielded wire harness ensures stable highspeed data transmission over longterm operation.

For RAID and NAS storage expansion

Builders expanding SAS RAID controllers or server backplanes with SATA hard drives or SSDs will find this cable a direct fit. It suits internal server and smallformfactor enclosures where a compact plugandplay harness simplifies cable routing. It is not for installers who need to connect drives using a different host interface or external connector types.

36pin SFF8087 to four SATA 7pin

The decisive specification is the single 36pin SFF8087 MiniSAS 4i interface breaking out to four SATA 7pin connectors. Verify that the host controller presents this exact port before ordering.

Highlights

  • Converts single 36-pin SFF8087 MiniSAS 4i port to four SATA 7-pin ports for multidrive expansion
  • Delivers stable highspeed SAS to SATA data transmission for HDDs, SSDs, RAID controllers and storage backplanes
  • Durable internal wire harness with anti-interference shielding for consistent longterm server performance
  • Plug-and-play design for easy integration into mainstream PC, server and NAS storage systems
  • Compact internal layout optimizes cable management in rackmount servers and small-form-factor enclosures

Specifications

No published specifications for this item yet.

Questions about this item

What clearance does the 36pin SFF8087 connector need to seat fully in a server backplane?

The straight MiniSAS 4i plug requires enough depth behind the port for the 36pin housing and latch to engage without bending the shielded harness.

Which step is most often missed when routing the four SATA 7pin tails to drives?

Align each SATA 7pin connector with the drive’s keyed port before pressing home; forcing a misaligned plug damages the delicate data pins.

How can I tell when the breakout cable should be replaced in a RAID array?

Replace it if SAStoSATA links drop intermittently, SMART errors climb on multiple drives simultaneously, or the shielding shows cuts from chassis edges.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.