We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
3m SFF-8644 Mini SAS HD to four 90° SATA connectors, black cable

SMUGDESK

SMUGDESK SFF-8644 Mini SAS HD to 4x 7Pin SATA 90° Cable 3m 6Gbps 28AWG IC Chip

SKU CH-1T81-JNV8F

Converts an SFF-8644 Mini SAS HD port to four 90° SATA connectors with an IC chip for stable 6Gbps transfer over 3m

  • Converts SFF-8644 Mini SAS HD to four SATA ports for flexible storage expansion
  • 90-degree SATA connectors keep internal wiring tidy and improve airflow in tight chassis
  • 28AWG wire with integrated IC chip delivers stable 6Gbps signal integrity over 3m length
  • Strong anti-interference design supports reliable 24/7 operation in server environments
  • Compatible with RAID controllers, SATA HDDs and SSDs for versatile array configurations

Mini SAS HD to SATA cable

This three-metre cable converts a single SFF-8644 Mini SAS HD port into four 90-degree 7Pin SATA connectors. An integrated IC chip and 28AWG conductors maintain stable 6Gbps transfer rates across the full length. The right-angle design keeps internal routing tidy in dense server chassis.

Builders wiring RAID arrays in tight enclosures

The 90-degree SATA ends suit cramped drive bays where straight plugs would block adjacent slots. Installers needing straight connectors or a different SAS interface will need another cable. Systems that require more than four SATA links per port are not served by this assembly.

3m length with 28AWG wire and IC chip

The combination of three-metre reach, 28AWG gauge and on-board signal conditioning lets the cable hold 6Gbps through a full server chassis. Shorter or lighter cables without the IC chip may not sustain that speed over the same distance.

Highlights

  • Converts SFF-8644 Mini SAS HD to four SATA ports for flexible storage expansion
  • 90-degree SATA connectors keep internal wiring tidy and improve airflow in tight chassis
  • 28AWG wire with integrated IC chip delivers stable 6Gbps signal integrity over 3m length
  • Strong anti-interference design supports reliable 24/7 operation in server environments
  • Compatible with RAID controllers, SATA HDDs and SSDs for versatile array configurations

Specifications

No published specifications for this item yet.

Questions about this item

What RAID controller port is required to plug in the SFF-8644 Mini SAS HD connector?

The cable needs a controller or backplane with an SFF-8644 Mini SAS HD port that supports 6Gbps SAS signalling.

Will the 90-degree SATA connectors clear low-profile drive cages when used with older 3.5-inch hard drives?

The right-angle design keeps the cable close to the drive body, so it fits most low-profile cages and 28AWG wire bends easily for tight routing.

How can I verify the link is running at 6Gbps after installation?

Check the RAID controller BIOS or OS utility; each attached drive should negotiate a 6Gbps SATA link speed with no errors reported.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.