We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black SFF-8643 Mini SAS HD male connector splitting to four SATA plugs on a flexible 3.2Ft cable

SMUGDESK

SMUGDESK SFF-8643 Mini SAS HD Male to 4 SATA Cable 3.2Ft

SKU CH-S4PR-TGPAN

Connects a single SFF-8643 SAS port to four SATA drives for RAID and NAS expansion

  • SFF-8643 port drives four SATA devices
  • 2 ft length fits tight server chassis
  • Low crosstalk design keeps 24/7 arrays stable
  • Flexible black sheath eases internal cable routing
  • Broad RAID and NAS compatibility simplifies multi-disk builds

Connection Splitter

This cable splits a single SFF-8643 Mini SAS HD male port into four SATA connectors. It is built for administrators expanding RAID arrays, NAS builders adding drive bays, and DIY storage servers needing dense internal wiring. The 3.2 foot length suits typical server chassis and storage rack layouts.

Connector Match

The decisive specification is the SFF-8643 Mini SAS HD male interface on the host side. Verify that your RAID controller or HBA presents this exact 8643 port before purchase; other Mini SAS generations use different keying and will not mate. Each of the four branches terminates in a standard SATA data plug for HDD or SSD attachment.

Signal Integrity

Internal conductors are arranged to minimise crosstalk and attenuation, supporting continuous 24/7 operation in storage arrays. The flexible black sheath resists abrasion and tolerates repeated bending inside tight enclosures without core damage. Moulded SATA connectors maintain firm contact under vibration, avoiding accidental disconnection during normal server use.

Highlights

  • SFF-8643 port drives four SATA devices
  • 2 ft length fits tight server chassis
  • Low crosstalk design keeps 24/7 arrays stable
  • Flexible black sheath eases internal cable routing
  • Broad RAID and NAS compatibility simplifies multi-disk builds

Specifications

No published specifications for this item yet.

Questions about this item

How many SATA drives can I connect to one SFF-8643 port with this cable?

The SFF-8643 Mini SAS HD male connector splits to four SATA interfaces, letting a single RAID controller port link up to four SATA hard drives or SSDs.

What SAS standard does the SFF-8643 connector follow and what speed does it support?

The SFF-8643 connector is a Mini SAS HD interface used for SAS connectivity; each of the four SATA lanes carries the speed negotiated between your RAID controller and the attached SATA devices.

Will the 3.2 ft length reach from a PCIe RAID card to drive bays in a typical server chassis?

At 3.2 ft (1 meter) the cable is designed for internal wiring in server chassis, NAS enclosures and storage racks, providing enough slack for tidy routing without excess length.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.