We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
50 cm SAS 29 pin to SATA 22 pin cable with 15 pin power connector

SMUGDESK

SMUGDESK SFF-8482 SAS 29-pin to SATA 22-pin cable 50cm with 15-pin power

SKU CH-J1A3-3J5C9

Connects SFF-8482 SAS 29-pin drives to SATA 22-pin ports with integrated 15-pin power over a 50 cm length

  • Connects SAS drives to SATA controllers via 29-pin to 22-pin adapter
  • Integrated 15-pin power port supplies drive power without extra cables
  • 50cm length keeps internal wiring tidy in cases and enclosures
  • Shielded construction supports stable high-speed data for RAID arrays
  • Compatible with SAS and SATA hard drives in servers and storage systems

SAS adapter cable for SATA drives

This 50cm cable converts a SFF-8482 SAS 29-pin port to a standard SATA 22-pin interface. An integrated 15-pin SATA power connector supplies drive power without a separate cable. The shielded assembly supports high-speed data transmission for HDDs and SSDs in RAID arrays or server storage.

Suits builders adding SAS drives to SATA controllers

Installers who need to connect SAS hard drives to motherboards or RAID cards with SATA ports will use this adapter. It is not for systems that require a direct SAS-to-SAS link or a different pin-count connector such as 36-pin wide ports. Buyers needing longer reach or external cabling should look at other solutions.

29-pin SFF-8482 to 22-pin SATA with 15-pin power

The single specification that decides fit is the 29-pin SFF-8482 SAS connector on one end and the combined 22-pin data plus 15-pin power SATA interface on the other. Verify that your drive and controller match these exact pin counts before ordering.

Highlights

  • Connects SAS drives to SATA controllers via 29-pin to 22-pin adapter
  • Integrated 15-pin power port supplies drive power without extra cables
  • 50cm length keeps internal wiring tidy in cases and enclosures
  • Shielded construction supports stable high-speed data for RAID arrays
  • Compatible with SAS and SATA hard drives in servers and storage systems

Specifications

No published specifications for this item yet.

Questions about this item

Will the 29-pin SFF-8482 connector fit the SAS backplane in my older server?

The 29-pin SFF-8482 end plugs directly into standard SAS backplanes, while the 22-pin SATA end connects to SATA drives or controllers.

How can I verify the 15-pin power port is delivering power to the drive after installation?

The drive should spin up and appear in the BIOS or RAID utility; if it remains silent, reseat the 15-pin power connector and check the PSU cable.

Does the 50 cm cable include both data and power connections, or do I need a separate Molex adapter?

The single 50 cm assembly carries a 29-pin SAS data link, a 22-pin SATA data link and a 15-pin SATA power port, so no extra power adapter is required.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.