SMUGDESK
SMUGDESK SATA Power Splitter Cord 15Pin Male to 5 Female 2PCS
Two cables each split one SATA power connector into five, supporting 2.5 and 3.5 inch drives with tinned copper conductors
- Powers five drives from one SATA connector
- Two cables included for multi-drive expansion
- Tinned copper core delivers stable power
- Moulded strain relief prevents cable breakage
- Compatible with 2.5 and 3.5 inch drives
Dual-Cable Pack for Multi-Drive Power
This pack contains two SATA power splitter cords that turn a single 15Pin male connector from an ATX power supply into five female ports each. The arrangement suits builders adding several 2.5 or 3.5 drives to a workstation or NAS where the power supply has limited SATA leads. No software or configuration is needed to use the cables.
One Male to Five Female Split
Each cord provides one 15Pin SATA male plug that divides into five 15Pin SATA female sockets, allowing up to five drives to draw power from a single supply connector. The 15Pin layout matches standard SATA power pinouts for HDDs, SSDs and optical drives. Verify the power supply has a free male port before connecting the splitter.
Tinned Copper Core with Strain Relief
Premium tinned copper conductors deliver stable current and resist oxidation during sustained operation, while thick PVC insulation protects the wires from abrasion. Moulded strain-relief collars on every connector absorb bending and vibration forces that can fatigue cables in a multi-drive chassis. Avoid exceeding the power supply's rated output on the rail feeding the splitter.
Highlights
- Powers five drives from one SATA connector
- Two cables included for multi-drive expansion
- Tinned copper core delivers stable power
- Moulded strain relief prevents cable breakage
- Compatible with 2.5 and 3.5 inch drives
Specifications
No published specifications for this item yet.
Questions about this item
How many drives can I power from one SATA 15Pin male connector on my PSU?
Each splitter turns one male connector into five female ports, so one PSU lead can feed up to five SATA drives.
Does this cable support the SATA power standard used by 2.5 and 3.5 inch drives?
Yes, the 15Pin SATA male and female connectors follow the standard SATA power interface used by 2.5 and 3.5 inch HDDs, SSDs and optical drives.
What clearance do I need inside the case for the split end of the cable?
The molded strain-relief connectors add a short rigid section at each female port, so allow a few centimetres beyond the drive power socket for the plug body.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



