We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Flat black SATA 15pin male plug splitting into four female connectors on 58cm cable

SMUGDESK

SMUGDESK SATA 15Pin Power Splitter Cord 1 to 4 23Inch 58CM

SKU CH-8YH0-P4DRK

A 23 inch SATA power splitter turns one 15 pin connector into four for drives

  • Splits one SATA power port into four 15-pin connectors
  • 23-inch length reaches drives across the chassis
  • Lockable SATA connectors prevent accidental disconnection
  • Flexible insulated wire fits tight case routing
  • Powers HDDs, SSDs and optical drives from a single rail

Power expansion for four drives

This 23 inch 1-to-4 SATA 15pin power splitter lets a single power supply connector feed up to four hard drives, SSDs or optical drives. The 58cm length reaches across most chassis layouts while keeping cable routing tidy. Lockable connectors hold firm against vibration inside the case. It is built for DIY builders expanding storage or upgrading workstations.

Suits multi-drive builds not high-power arrays

The cord serves builders who need more SATA power ports for additional storage devices. It is not for configurations where the combined drive draw exceeds the power supply rail limit. Users without standard 15pin SATA power headers on their drives cannot use this adapter. Systems requiring Molex or other power interfaces need a different solution.

Simple plug-in with one wiring check

Installation is a direct male-to-female connection requiring no tools or software. The main risk is exceeding the power supply SATA rail capacity when four drives spin up together. Verify each device uses a standard 15pin SATA power socket before connecting. Route the flexible insulated wire away from sharp edges to maintain long-term reliability.

Highlights

  • Splits one SATA power port into four 15-pin connectors
  • 23-inch length reaches drives across the chassis
  • Lockable SATA connectors prevent accidental disconnection
  • Flexible insulated wire fits tight case routing
  • Powers HDDs, SSDs and optical drives from a single rail

Specifications

No published specifications for this item yet.

Questions about this item

What power-supply connector must I have free to plug in the single SATA 15-pin male end?

You need one spare SATA 15-pin power connector from your PSU; the splitter draws all four outputs from that single rail.

Can I mix older SATA hard drives and newer SSDs on the four female ports?

Yes — each female port follows the standard SATA 15-pin pinout, so legacy HDDs and modern SSDs can be connected together.

How do I verify the cable is delivering power correctly after installation?

Check that every attached drive spins up and is recognised in BIOS or the OS; if any drive stays dark, reseat the lockable connectors and confirm total draw stays within the PSU SATA rail limit.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.