We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Flat black cable with one SATA 15-pin male plug branching to five female connectors

SMUGDESK

SMUGDESK SATA 15Pin 1 Male to 5 Female Power Splitter Cord

SKU CH-TGHM-A3K7Q

Turns one SATA 15Pin power connector into five female ports for multi-drive storage expansion

  • Expands one SATA 15Pin connector into five power outputs
  • Supports 2.5 and 3.5 inch HDD, SSD and optical drives
  • Tinned copper conductors deliver stable power with reduced voltage drop
  • Reinforced strain-relief connectors prevent loose contacts under vibration
  • Plug-and-play installation works with standard ATX power supplies

Power expansion for multi-drive builds

This SATA 15Pin splitter turns one male connector from your power supply into five female ports, letting you add several storage devices without extra PSU cables. It suits DIY desktop builders, small-server assemblers and anyone expanding drive bays in a standard ATX chassis.

Tinned copper wiring with moulded strain relief

Premium tinned copper conductors reduce voltage drop and resist oxidation for stable power delivery to every drive. Reinforced injection-moulded connectors with strain relief prevent loose contacts or wire fracture when cables are routed through tight chassis spaces or subjected to vibration.

Single-rail current limit applies

All five outputs share the original SATA power rail, so total current draw must stay within the connector and PSU rating. Builders planning large RAID arrays or many high-spin mechanical drives should verify the power supply can handle the combined load before connecting every device.

Highlights

  • Expands one SATA 15Pin connector into five power outputs
  • Supports 2.5 and 3.5 inch HDD, SSD and optical drives
  • Tinned copper conductors deliver stable power with reduced voltage drop
  • Reinforced strain-relief connectors prevent loose contacts under vibration
  • Plug-and-play installation works with standard ATX power supplies

Specifications

No published specifications for this item yet.

Questions about this item

What does the SATA 15-pin interface cap in practice?

One male connector splits into five female ports, each delivering standard SATA power to 2.5 or 3.5 drives.

What clearance does the splitter need to fit inside a chassis?

The moulded strain-relief connectors require enough room behind each drive bay for the 15-pin plugs to seat without sharp bends.

How is the cable installed and what step is often missed?

Plug the male end into a spare PSU SATA lead, then attach up to five drives; verify the PSU rail can supply the combined load before powering on.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.