SMUGDESK
SMUGDESK PCIe X1 to X1 Ribbon Extension Cable 8Gbps Gold Plated
Extends a PCIe X1 slot with a flexible gold-plated ribbon cable supporting 8Gbps bandwidth for mining rig layouts
- Extends PCIe X1 slot reach for flexible mining-rig layouts
- Gold-plated connectors cut signal loss for stable long-run mining
- Delivers up to 8 Gbps bandwidth for standard mining data rates
- Flat ribbon cable saves chassis space and eases cable routing
- Works with Windows and Linux mining systems for BTC builds
PCIe X1 Extension Cable
This PCIe X1 to X1 ribbon extension cable lets you reposition a card when the motherboard slot layout is too tight. It carries data at up to 8 Gbps through gold-plated connectors that resist signal loss during continuous operation. The flat ribbon wire keeps wiring tidy inside a mining frame or compact chassis. It works with Windows and Linux mining systems.
Builders with restricted slot spacing
The straight X1-to-X1 design solves slot-position shortages on mining rigs and other boards where adjacent cards would collide. It is not suited for installations that need an angled or right-angle connector to clear nearby components. Users who require a powered riser with external auxiliary power will not find that feature here. The cable only extends the existing X1 electrical link.
8 Gbps bandwidth limit
The link tops out at 8 Gbps, matching the PCIe 3.0 X1 signalling rate. Cards that need higher lane counts or faster signalling will not gain extra throughput from this adapter. Check the card’s electrical requirement before buying.
Highlights
- Extends PCIe X1 slot reach for flexible mining-rig layouts
- Gold-plated connectors cut signal loss for stable long-run mining
- Delivers up to 8 Gbps bandwidth for standard mining data rates
- Flat ribbon cable saves chassis space and eases cable routing
- Works with Windows and Linux mining systems for BTC builds
Specifications
No published specifications for this item yet.
Questions about this item
Does this cable need a free PCIe x1 slot on the motherboard?
Yes, it plugs straight into an x1 slot and extends it outward for the riser card.
Will a PCIe 3.0 x1 graphics card run at full speed through this 8 Gbps link?
The cable is rated for 8 Gbps, matching PCIe 3.0 x1 bandwidth, so the card operates at its normal rate.
How can I confirm the riser is seated correctly after routing the ribbon?
The system should detect the card in BIOS or OS device manager with no PCIe link errors reported.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115078BTC
In stock
