We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green PCIe card with one USB-A and one USB-C port, metal bracket, gold edge connector

SMUGDESK

SMUGDESK PCIe to USB 3.1 Gen 2 Expansion Card 10Gbps 2-Port Type-A Type-C Data Adapter

SKU CH-NV6H-528JM

Adds two 10Gbps USB 3.1 Gen 2 ports (Type-A and Type-C) via PCIe, with overcurrent protection and optional SATA power for stable high-speed transfers

  • Add two 10Gbps USB ports for faster external storage
  • One Type-A and one reversible Type-C connector included
  • Works in PCIe x4, x8 or x16 slots from Gen 1.1 to 3.0
  • Overcurrent protection plus optional 15-pin SATA power for stable voltage
  • Plug-and-play on Windows 7 through 10 and Linux kernels

USB 3.1 Gen 2 expansion card

The SMUGDESK PCIe adapter adds one USB Type-A and one USB Type-C port to a desktop computer, each running at 10Gbps SuperSpeed+ bandwidth. It fits PCIe x4, x8 or x16 slots across PCIe 1.1, 2.0 and 3.0 generations and includes both full-height and low-profile brackets for standard or slim cases. The board draws optional auxiliary power from a 15-pin SATA connector to keep voltage stable under heavy load. Overcurrent protection is built into each port for safe operation.

Desktop users needing faster external storage

Builders who want to connect NVMe SSDs, high-speed external drives or modern USB-C peripherals will benefit from the 10Gbps throughput and broad OS support covering Windows 7, 8, 8.1, 10 and Linux kernels. The card is backward compatible with USB 3.0, 2.0 and 1.1 devices, so legacy gear still works. Systems without a free PCIe slot or without a SATA power connector for the optional auxiliary feed cannot use all features. Buyers who need more than two additional ports should look at a different solution.

Dual-port 10Gbps bandwidth

The single specification that decides fit is the combined 10Gbps SuperSpeed+ rate delivered on each of the two ports via USB 3.1 Gen 2 signalling. This bandwidth level determines whether the adapter can saturate fast NVMe drives or high-throughput peripherals. If the target workload requires only USB 3.0 speeds, a lower-spec card would suffice, but the 10Gbps rating is the decisive figure for high-performance external storage.

Highlights

  • Add two 10Gbps USB ports for faster external storage
  • One Type-A and one reversible Type-C connector included
  • Works in PCIe x4, x8 or x16 slots from Gen 1.1 to 3.0
  • Overcurrent protection plus optional 15-pin SATA power for stable voltage
  • Plug-and-play on Windows 7 through 10 and Linux kernels

Specifications

No published specifications for this item yet.

Questions about this item

How can I verify the card is delivering 10Gbps per port after installation?

Check the connection speed in Device Manager or lsusb -t; each port should report 10Gbps SuperSpeed+ when a compatible device is attached.

Which brackets and cables are included, and what must I supply?

Full-height and low-profile brackets are included; the optional 15-pin SATA power cable is not included and must be sourced separately if needed.

Should I choose the Type-A or Type-C port for an NVMe enclosure?

Both ports provide 10Gbps bandwidth; use the Type-C port for reversible connection or the Type-A port if your enclosure cable matches it.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.