We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green PCB adapter card with PCIe x1 edge connector and PCI slot 16 1083

SMUGDESK

SMUGDESK PCIe to PCI Adapter Card ASM1083

SKU CH-NH3W-1CHS6

Converts a PCIe x1 slot into a standard PCI bus for legacy add-on cards using the ASM1083 bridge chip

  • Converts PCIe x1 slot to PCI bus for legacy cards
  • ASM1083 bridge chip ensures stable signal transmission during long sessions
  • Fits PCIe x1, x4, x8 and x16 motherboard slots for flexible installation
  • Supports parallel, serial and old SATA controller PCI devices
  • Compatible with Windows and Linux for industrial and desktop upgrades

Legacy PCI Bridge for Modern Motherboards

This adapter converts a single PCIe x1 slot into a standard PCI bus interface so older expansion cards can be used in current desktop systems. It is built around the ASM1083 bridge chip to maintain stable signal transmission during extended operation. The card fits any PCIe x1, x4, x8 or x16 slot, giving flexibility across different board layouts. It targets users who still rely on parallel, serial or legacy SATA controller cards.

Replaces Missing Native PCI Slots

Newer motherboards often omit native PCI connectors, leaving no way to install older peripherals. This card restores that capability without requiring a platform change. The upgrade is worthwhile when an industrial control card or specialised I/O device must stay in service and no PCI slot exists on the board. It does not help builders who need additional PCIe lanes or modern high-speed interfaces.

Steady Operation Under Continuous Load

The ASM1083 chipset is chosen for reliable performance during long-hour workloads typical in industrial environments. Signal integrity remains consistent rather than degrading after a short burst of activity. Compatibility with Windows and Linux ensures the attached legacy device behaves predictably across supported operating systems. Buyers needing multiple simultaneous legacy cards will require a separate adapter for each device.

Highlights

  • Converts PCIe x1 slot to PCI bus for legacy cards
  • ASM1083 bridge chip ensures stable signal transmission during long sessions
  • Fits PCIe x1, x4, x8 and x16 motherboard slots for flexible installation
  • Supports parallel, serial and old SATA controller PCI devices
  • Compatible with Windows and Linux for industrial and desktop upgrades

Specifications

No published specifications for this item yet.

Questions about this item

Which motherboard slot does the PCIe x1 edge connector fit into?

The adapter plugs into any PCIe x1, x4, x8 or x16 slot on the motherboard.

What is the common mistake when seating the card?

Users often leave the bracket screw loose, causing the card to tilt and break PCI contact.

Does the ASM1083 bridge chip require any firmware updates over time?

No firmware updates are needed; the 1083 chip runs without driver intervention on Windows and Linux.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.