SMUGDESK
SMUGDESK PCIe Slimline SAS SFF8654 8i to 8×90Degree SATA Fanout Cable .8m
Connects one SFF-8654 8i SAS port to eight 90-degree SATA drives at 24Gbps for dense server storage expansion
- Single SFF-8654 8i port fans out to eight SATA drives
- 24 Gbps bandwidth supports enterprise SSD and HDD performance
- 90-degree SATA plugs fit tight server chassis spaces
- 32 AWG pure copper conductors reduce signal loss over distance
- .8 m length keeps internal cable routing clean and organized
Single SFF8654 8i to eight 90degree SATA fanout
This cable converts one SFF8654 8i connection into eight rightangle SATA links for dense drive deployments. It supports 24Gbps eightchannel throughput using 32AWG pure copper conductors with multilayer shielding. The .8m length keeps internal routing tidy in enterprise servers and RAID arrays.
Suits builders adding many drives to a single host
Ideal for administrators expanding storage behind one Slimline SAS interface in spaceconstrained chassis. The 90degree SATA ends reduce bend radius and improve airflow in highdensity bays. Not for systems lacking an SFF8654 8i receptacle or installations requiring straight SATA plugs.
24Gbps eightchannel bandwidth over .8m
This rate and lane count define whether the cable matches your controller and backplane specification. Verify the host side accepts SFF8654 8i and that each drive uses a standard SATA interface before purchasing.
Highlights
- Single SFF-8654 8i port fans out to eight SATA drives
- 24 Gbps bandwidth supports enterprise SSD and HDD performance
- 90-degree SATA plugs fit tight server chassis spaces
- 32 AWG pure copper conductors reduce signal loss over distance
- .8 m length keeps internal cable routing clean and organized
Specifications
No published specifications for this item yet.
Questions about this item
What host port is required to use this SFF8654 8i fanout cable?
The cable connects to a single SFF8654 8i Slimline SAS port on your HBA, RAID controller, or motherboard to provide eight SATA channels.
Can I attach older SATA hard drives or SSDs to the eight 90degree connectors on this cable?
Yes, each 90degree SATA connector accepts standard SATA drives, and the 24Gbps SAS link negotiates down to the drive's native SATA speed automatically.
How can I verify the 8channel 24Gbps link is active after installing the cable?
Check your HBA or RAID controller BIOS/utility — it should show eight attached SATA devices at 24Gbps per lane with no errors reported.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



