We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short silver cable with a wide 38pin connector splitting into two smaller plugs and a SATA power tail

SMUGDESK

SMUGDESK PCIe Slimline SAS 4.0 SFF8654 4i to Dual SFF8482 2in1 Cable with SATA Power .5M 24Gbps 30AWG

SKU CH-D9NH-PXVJZ

Connects one 38-pin SFF8654 4i port to dual SFF8482 SAS drives with SATA power over .5M at 24Gbps using 30AWG copper

  • Single SFF8654 4i port splits to dual SFF8482 connectors for expanded SAS drive connectivity
  • Integrated SATA power port delivers both data and power to SAS drives through one cable
  • 24Gbps bandwidth supports enterprise RAID and high-speed storage system performance
  • 30AWG pure copper conductors minimise signal loss, crosstalk and electromagnetic interference
  • Compact 0.5M or 19.68in length enables tidy short-range wiring inside server chassis

Slimline SAS 4.0 Breakout Cable

This PCIe 4.0 harness splits a single 38pin SFF8654 4i port into two SFF8482 connectors. It targets server administrators who need to connect dual SAS drives to one slimline controller port in dense enclosures.

Passive Copper Link Thermals

The 30AWG pure copper conductors carry 24Gbps bandwidth without active cooling or added power draw. Zero fan noise and no extra thermal load keep the cable invisible to system airflow and temperature budgets.

Integrated SATA Power Delivery

A builtin SATA power port feeds both SAS drives directly from the harness, removing the need for separate power cables from the PSU. This simplifies internal routing and reduces connector count in compact 0.5M chassis builds.

Highlights

  • Single SFF8654 4i port splits to dual SFF8482 connectors for expanded SAS drive connectivity
  • Integrated SATA power port delivers both data and power to SAS drives through one cable
  • 24Gbps bandwidth supports enterprise RAID and high-speed storage system performance
  • 30AWG pure copper conductors minimise signal loss, crosstalk and electromagnetic interference
  • Compact 0.5M or 19.68in length enables tidy short-range wiring inside server chassis

Specifications

No published specifications for this item yet.

Questions about this item

How do I connect the SFF8654 4i end and the dual SFF8482 ends inside my server?

Insert the 38pin SFF8654 4i connector into the Slimline SAS 4.0 port on the controller, then plug each SFF8482 connector into a SAS drive backplane. Attach a SATA power cable to the integrated power port so both drives receive power.

Will the 30AWG copper conductors or the SATA power port need replacement over time?

The 30AWG copper harness is passive and rated for the life of the installation; only the SATA power cable from the PSU may need replacement if its connector wears out.

At what point does the 0.5M length limit signal quality under sustained 24Gbps loads?

The 0.5M / 19.68in length is within the SAS 4.0 electrical spec for 24Gbps, so sustained throughput is maintained without signal degradation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.