We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black PCIe 8-pin to dual 6+2-pin power splitter cable, 25 inch main with 10 inch branch

SMUGDESK

SMUGDESK PCIe 8 Pin to Dual 8 Pin (6+2) Power Splitter Cord 25+10 Inches

SKU CH-HCD0-R94FT

Connects a single PCIe 8-pin PSU output to two 6+2-pin GPU power connectors with a 25-inch main cable and 10-inch branch

  • Powers dual GPU connectors from one PSU output
  • 6+2 pin design fits both 6-pin and 8-pin ports
  • Optimised for EVGA modular power supplies
  • 25 inch main cable plus 10 inch branch for flexible routing
  • Thick copper conductors deliver stable current under load

PCIe 8-pin to dual 8-pin splitter

This SMUGDESK power splitter converts one PCIe 8-pin output from a modular PSU into two 8-pin (6+2) connectors for graphics cards. The detachable 6+2 design fits both 6-pin and 8-pin GPU power ports. Thickened copper conductors aim to maintain stable current delivery under heavy load. A durable insulating sheath adds bending resistance for long-term use inside a chassis.

Replaces improvised daisy-chain cables

The splitter removes the need to chain multiple adapters when a single PSU cable must feed dual GPU power ports. The separated 25-inch main line and 10-inch branch line allow cleaner routing than a single fixed-length cord. The jump is worth it when your modular PSU lacks enough native PCIe leads for a dual-connector card. Confirm your PSU output spec and GPU power draw before installing.

Suits EVGA modular PSU owners with dual-port GPUs

Builders using EVGA modular supplies who need two 8-pin (6+2) plugs from one port will find the pinout matched for that ecosystem. The flexible lengths help tidy cables in standard ATX cases. Buyers whose PSU already provides sufficient native PCIe connectors do not need this adapter. Anyone with a non-modular or differently keyed PSU should verify compatibility first.

Highlights

  • Powers dual GPU connectors from one PSU output
  • 6+2 pin design fits both 6-pin and 8-pin ports
  • Optimised for EVGA modular power supplies
  • 25 inch main cable plus 10 inch branch for flexible routing
  • Thick copper conductors deliver stable current under load

Specifications

No published specifications for this item yet.

Questions about this item

What length main cable and branch cable does this SMUGDESK PCIe 8-pin splitter provide for routing inside a case?

The main cable is 25 inches long and the branch cable is 10 inches long, giving separate lengths for flexible layout inside the chassis.

How do I attach the 6+2 detachable terminals to match my graphics card's 6-pin or 8-pin power ports?

Combine the 6-pin base with the 2-pin extension for an 8-pin connector, or use only the 6-pin base for a 6-pin port; the detachable design lets you configure each end to fit the GPU.

When should I inspect or replace the copper conductors and insulating sheath on this power splitter cord?

Check the thickened copper conductors and durable insulating sheath periodically for signs of wear, cracking or heat damage, especially after long-duration heavy gaming loads, and replace the cable if any degradation is found.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.