We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green PCB adapter card with gold PCIe 1x edge connector and silver Oculink SFF8612 port, low-profile metal bracket

SMUGDESK

SMUGDESK PCIe 4.0 1x to Oculink SFF8612/SFF8611 Host Adapter Card

SKU CH-ZF4J-YE3DJ

Converts a PCIe 1x slot to Oculink SFF8612/SFF8611 for U.2 NVMe SSDs or eGPU docks with PCIe 4.0 bandwidth

  • PCIe 4.0 bandwidth enables fast U.2 NVMe storage
  • Single 1x slot converts to Oculink SFF8612 / SFF8611 port
  • Dual-purpose design supports U.2 SSD and eGPU dock
  • Low-profile bracket fits standard desktop and server slots
  • Shielded circuitry reduces interference for reliable long-term use

Host adapter for U.2 SSD and eGPU

This PCIe 4.0 host adapter converts a single-lane PCIe 1x slot into an Oculink SFF8612 or SFF8611 port. It enables connection of U.2 NVMe solid-state drives or external GPU docks for storage expansion and graphics acceleration. The low-profile bracket fits standard desktop and entry-level server chassis. Robust shielding and precise circuit design minimise interference for reliable operation.

Sustained load behaviour

High-speed signal transmission maintains consistent bandwidth during prolonged storage or compute workloads. Enterprise SSDs and external graphics accelerators receive stable throughput without short-burst throttling. EMI shielding preserves signal integrity over extended sessions. The design supports reliable long-term usage under continuous demand.

Pre-order checks

Verify your motherboard has a free PCIe 1x slot and that your chassis accommodates a low-profile bracket. Confirm the target U.2 NVMe drive or eGPU dock uses an Oculink SFF8611 or SFF8612 interface. Ensure your system BIOS and operating system support PCIe 4.0 speeds on the chosen slot. Check that power delivery meets the requirements of the connected device.

Highlights

  • PCIe 4.0 bandwidth enables fast U.2 NVMe storage
  • Single 1x slot converts to Oculink SFF8612 / SFF8611 port
  • Dual-purpose design supports U.2 SSD and eGPU dock
  • Low-profile bracket fits standard desktop and server slots
  • Shielded circuitry reduces interference for reliable long-term use

Specifications

No published specifications for this item yet.

Questions about this item

How much heat or power draw does this PCIe 4.0 1x to Oculink card add when running all day?

The adapter itself is a passive circuit board with no active cooling, so it adds negligible heat and draws only the minimal power required for signal conversion through the PCIe 1x slot.

What must I already own to use this host adapter for a U.2 NVMe SSD or eGPU dock?

You need a free PCIe 1x slot on your motherboard, an Oculink SFF8612 or SFF8611 cable, and either a U.2 NVMe drive with carrier or an external GPU enclosure that accepts Oculink input.

Will this card work reliably in an older server that only has PCIe 3.0 slots?

Yes, the PCIe 4.0 interface is backward compatible, so the adapter will function in a PCIe 3.0 1x slot at the slower generation's bandwidth while still providing the Oculink connection.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.