We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

SMUGDESK

SMUGDESK PCI Combo Expansion Card Power eSATA USB SATA 40Pin IDE Hybrid Storage Adapter

SKU CH-3AB3-MMGWX

A single PCI slot adds powered eSATA, USB, internal SATA and 40-pin IDE ports to connect 2.5 and 3.5-inch drives on older desktops

  • Single PCI slot adds external Power eSATA+USB and internal SATA plus 40Pin IDE
  • Powered eSATA supplies 5V/12V to run 2.5/3.5-inch external drives without extra adapter
  • Connects legacy IDE mechanical drives and modern SATA HDD/SSD to reuse old storage devices
  • Standard PCI interface fits common PCI slots on older desktop motherboards for easy installation
  • Works under Windows and Linux with matched driver for office and data backup use

Hybrid PCI Storage Adapter

This PCI expansion card adds internal SATA and 40Pin IDE connectors alongside an external powered eSATA and USB combination port. It targets owners of older desktop systems who need to connect mixed-generation drives through a single legacy slot.

Capacity and Headroom

The powered eSATA port supplies 5V and 12V to run 2.5 and 3.5-inch external hard disks without a separate adapter. Internal SATA and IDE headers support legacy mechanical drives and modern SATA SSDs, but the single PCI bus limits total throughput for simultaneous heavy transfers.

Thermals Noise and Power

The card draws power directly from the PCI slot and has no active cooling, so it runs silently in normal office and backup workloads. External drive spin-up current is provided by the onboard eSATA power circuitry rather than the system supply.

Highlights

  • Single PCI slot adds external Power eSATA+USB and internal SATA plus 40Pin IDE
  • Powered eSATA supplies 5V/12V to run 2.5/3.5-inch external drives without extra adapter
  • Connects legacy IDE mechanical drives and modern SATA HDD/SSD to reuse old storage devices
  • Standard PCI interface fits common PCI slots on older desktop motherboards for easy installation
  • Works under Windows and Linux with matched driver for office and data backup use

Specifications

No published specifications for this item yet.

Questions about this item

Will the card fit into a standard PCI slot on an older motherboard?

Yes, the card uses a standard PCI interface that fits common PCI slots on older desktop motherboards.

How can I confirm the powered eSATA port is delivering 5V and 12V to an external drive?

Connect a 2.5 or 3.5 inch drive to the eSATA port; if it spins up and appears in the OS without an extra power adapter, the port is supplying power.

Does the box include cables for the internal SATA and 40Pin IDE connectors?

The card provides the SATA and 40Pin IDE interfaces; cables for those internal connections are not included and must be sourced separately.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.