We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
OCuLink SFF-8611 4i to right-angle SATA 7-pin cable, .5 m, 32 AWG, 12 Gbps SAS

SMUGDESK

SMUGDESK OCuLink SFF-8611 4i to SATA 7P Right Angle .5M 32AWG 12Gbps SAS Cable

SKU CH-S94N-5WRAF

Connects an OCuLink SFF-8611 4i port to a right-angle SATA 7-pin drive using .5 m of 32 AWG copper for 12 Gbps SAS bandwidth

  • Converts OCuLink SFF-8611 4i port to right-angle SATA 7-pin for compact server storage expansion
  • Supports 12Gbps high-speed data transfer for PCIe and SAS enterprise storage protocols
  • Premium 32AWG low-loss copper wire minimizes signal attenuation and crosstalk for stable integrity
  • Right-angle SATA connector saves internal space in slim servers and tight backplane layouts
  • 5M optimized short length enables clean internal routing for RAID controllers and high-density enclosures

Purpose and audience

This 0.5 metre cable adapts an OCuLink SFF8611 4i host port to a right-angle SATA 7-pin connector. It targets administrators expanding storage inside slim servers, high-density NAS units or RAID enclosures where space is tight and a direct drive link is required.

Deciding specification

The harness is rated for 12 Gbps bandwidth and built with 32 AWG low-loss copper to maintain signal integrity across SAS and PCIe storage protocols. If the controller or backplane demands a different signalling rate or connector keying, this assembly will not function.

Installation notes

The right-angle SATA plug reduces clearance issues behind drive bays and the short length keeps routing tidy inside crowded chassis. Mis-alignment during insertion can bend the delicate SATA pins, and forcing the latch in a cramped backplane often damages the connector housing.

Highlights

  • Converts OCuLink SFF-8611 4i port to right-angle SATA 7-pin for compact server storage expansion
  • Supports 12Gbps high-speed data transfer for PCIe and SAS enterprise storage protocols
  • Premium 32AWG low-loss copper wire minimizes signal attenuation and crosstalk for stable integrity
  • Right-angle SATA connector saves internal space in slim servers and tight backplane layouts
  • 5M optimized short length enables clean internal routing for RAID controllers and high-density enclosures

Specifications

No published specifications for this item yet.

Questions about this item

What does 12Gbps mean for my RAID array?

It provides up to 12Gbps bandwidth per lane for SAS and PCIe storage protocols, limited by the slowest connected drive or controller.

Which OCuLink standard does the SFF-8611 connector follow?

The SFF-8611 4i plug carries four lanes of PCIe or SAS signalling at 12Gbps per lane.

Will the right-angle SATA end clear my backplane?

The right-angle SATA 7pin connector saves internal space for slim servers and tight backplane layouts.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.