We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
SMUGDESK Mini SAS SFF8087 to four SATA female fanout cable 3.3FT

SMUGDESK

SMUGDESK Mini SAS SFF8087 to 4Port SATA Female Fanout Cable 3.3FT

SKU CH-PF6E-5EFVG

Connects a SAS controller to four SATA drives using an SFF-8087 male plug and a 3.3 ft fanout cable for server storage expansion

  • Connect four drives from one controller with 1to4 SFF8087 fanout design
  • Maintain reliable throughput for RAID arrays with highspeed stable data transfer
  • Swap or add SATA drives easily using four female SATA connectors
  • Route cables cleanly inside server chassis with 3.3FT length
  • Reduce signal loss in dense storage builds with antiinterference shielding

1-to-4 SAS Fanout Cable

The SMUGDESK Mini SAS SFF8087 cable converts a single controller port into four SATA female connections. It enables direct attachment of SATA hard drives or SSDs to a SAS backplane or RAID adapter. The 3.3FT length suits standard server chassis routing. This new cable targets administrators expanding internal storage arrays.

Suits RAID and JBOD Expansion

Administrators adding multiple SATA drives to a SAS HBA or RAID card will find the pin-out and shielding appropriate. Builders who need a straight SFF8087-to-SFF8087 link, a different fanout ratio, or external multilane connectors should select another cable type. The SATA female ends also limit use to drives with standard SATA interfaces.

SFF8087 to Four SATA Female Ports

The SFF8087 male plug carries four SAS lanes that fan out to individual SATA 7-pin female receptacles. This 1-to-4 mapping is the decisive specification: it determines whether the cable matches the controller port count and drive bay population. Verify the controller uses SFF8087 before ordering.

Highlights

  • Connect four drives from one controller with 1to4 SFF8087 fanout design
  • Maintain reliable throughput for RAID arrays with highspeed stable data transfer
  • Swap or add SATA drives easily using four female SATA connectors
  • Route cables cleanly inside server chassis with 3.3FT length
  • Reduce signal loss in dense storage builds with antiinterference shielding

Specifications

No published specifications for this item yet.

Questions about this item

How can I confirm the SFF8087 to 4-port SATA fanout cable is working correctly after installation?

Connect the SFF8087 end to your SAS controller and attach up to four SATA drives; the system BIOS or RAID utility should detect each drive at full SATA speed without errors.

What comes in the box and do I need any extra parts to use this cable?

The package contains the 3.3FT Mini SAS SFF8087 male to four SATA female fanout cable only; you must supply a compatible SAS controller and SATA power cables for each drive.

Which cable length should I choose for a typical server chassis?

The 3.3FT (1M) length is designed for standard internal server wiring and fits most chassis layouts for tidy cable routing.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.