We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Mini SAS SFF8087 to four SATA breakout cable

SMUGDESK

SMUGDESK Mini SAS SFF8087 to 4Port SATA Cable for Server

SKU CH-1S69-BCHG8

Converts a Mini SAS SFF8087 port into four SATA ports with shielded wiring for stable server RAID connections

  • One SFF8087 port splits into four SATA ports
  • High-speed stable data transmission for RAID controllers
  • Server-grade shielding reduces signal loss and interference
  • Designed for internal rackmount server backplane wiring
  • Plug-and-play installation for storage expansion and upgrades

Breakout cable for SAS-to-SATA server wiring

This SMUGDESK cable converts one Mini SAS SFF-8087 port into four independent SATA connectors. It is built for internal rack-mount servers and backplane wiring where SATA hard drives or solid-state drives attach to a SAS RAID controller. The shielded construction reduces signal loss, crosstalk and electromagnetic interference during high-speed data transfer.

Suits server builders expanding SATA storage

Installers who need a plug-and-play link between a single controller port and up to four SATA drives will find this cable matches the task. It is not for systems that lack an SFF-8087 port, nor for configurations that require more than four SATA connections per Mini SAS interface.

One Mini SAS SFF-8087 plug fans out to four SATA

The 1-to-4 breakout topology is the decisive specification: each cable provides exactly four SATA data connections from a single 8087 connector. Verify that the host controller presents an SFF-8087 port and that the target drives use standard SATA interfaces before ordering.

Highlights

  • One SFF8087 port splits into four SATA ports
  • High-speed stable data transmission for RAID controllers
  • Server-grade shielding reduces signal loss and interference
  • Designed for internal rackmount server backplane wiring
  • Plug-and-play installation for storage expansion and upgrades

Specifications

No published specifications for this item yet.

Questions about this item

Does the SFF-8087 end need a specific port orientation on my RAID controller?

The Mini SAS SFF-8087 connector is keyed and inserts one way only; align the notch with the controller port before pressing it in firmly.

What is the most common mistake when routing the four SATA tails to the drives?

Builders often fold the breakout wires too tightly behind the backplane, stressing the crimp joints; leave a gentle service loop so each SATA plug seats straight.

When should I replace this cable in a production server?

Swap it out if the shielding shows cuts, the latch tabs snap off, or SMART logs start reporting intermittent CRC errors on the attached SAS or SATA drives.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.