We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black .5M Mini SAS HD SFF8644 with IC to SFF8087 cable, 28AWG 10Ohm, 12Gbps SAS

SMUGDESK

SMUGDESK Mini SAS HD SFF8644 with IC to SFF8087 Cable .5M 12Gbps 28AWG 10Ohm Black

SKU CH-EHWA-NWAMG

Connects external Mini SAS HD SFF8644 to internal SFF8087 with built-in IC for stable 12Gbps SAS links

  • Built-in IC chip boosts signal stability for SFF8644-to-SFF8087 links
  • 12Gbps SAS bandwidth enables high-speed server stacking and JBOD expansion
  • 28AWG 10Ohm copper wire reduces signal loss and crosstalk
  • Shielded black jacket built for long-term data-centre reliability
  • .5M length fits close-range rack connections between controllers and enclosures

Mini SAS HD SFF8644 to SFF8087 cable with IC

This 0.5M server stacking cable connects external Mini SAS HD SFF8644 ports to internal SFF8087 interfaces. A builtin IC chip amplifies the signal for stable 12Gbps SAS transmission. It is designed for enterprise server stacking, JBOD expansion and multistorage chassis links in data center environments.

Check connector types and spacing before ordering

Verify that your source device presents an SFF8644 Mini SAS HD port and the target uses an SFF8087 interface. Confirm the 0.5M reach suits the physical gap between your controller, enclosure or backplane. The 28AWG 10Ohm copper construction requires matching impedance on both ends for reliable operation.

Thermals noise and power draw in normal use

The passive copper assembly with shielding draws no auxiliary power and produces no audible noise during operation. Signal amplification is handled by the inline IC without active cooling requirements. Heat generation remains negligible inside server chassis airflow paths during continuous 12Gbps data transfer.

Highlights

  • Built-in IC chip boosts signal stability for SFF8644-to-SFF8087 links
  • 12Gbps SAS bandwidth enables high-speed server stacking and JBOD expansion
  • 28AWG 10Ohm copper wire reduces signal loss and crosstalk
  • Shielded black jacket built for long-term data-centre reliability
  • .5M length fits close-range rack connections between controllers and enclosures

Specifications

No published specifications for this item yet.

Questions about this item

Does the .5M cable come with any extra adapters or mounting hardware?

The cable ships as a single assembly with SFF8644 and SFF8087 connectors; no additional adapters or brackets are included.

Should I choose a longer length or a different wire gauge for my server rack?

The .5M length uses 28AWG 10Ohm wire and is designed for short-range stacking links; longer runs would need a different cable specification.

Will the 12Gbps rating be achieved when the cable is connected to my RAID controller?

The built-in IC chip and 10Ohm impedance-matched wire support stable 12Gbps SAS transmission when both ends negotiate that speed.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.