We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short blue cable with silver SFF-8644 plug splitting to two silver SFF-8482 29-pin SATA connectors

SMUGDESK

SMUGDESK Mini SAS HD SFF8644 to SFF8482 29Pin 2in1 SATA Cable .5M 12Gbps 28AWG

SKU CH-PQMJ-8PD6N

Converts Mini SAS HD SFF8644 to dual SFF8482 29pin SATA ports with 12Gbps bandwidth over .5M of 28AWG copper

  • Connect two SATA drives via one Mini SAS HD SFF8644 port using the 2in1 SFF8482 29pin design
  • Achieve steady 12Gbps data transfer for SAS and SATA HDDs and SSDs
  • Maintain signal integrity with premium 28AWG lowloss copper harness construction
  • Route cleanly inside compact servers and NAS enclosures with the 0.5M length
  • Expand enterprise storage and build RAID arrays with wide SATA device compatibility

Connection type and use

This Mini SAS HD SFF8644 to dual SFF8482 cable connects a single 12Gbps SAS controller port to two SATA drives. It suits server and NAS builders expanding internal storage with standard hard drives or SSDs.

Setup checks

Verify the host controller or backplane presents an SFF8644 Mini SAS HD receptacle and that each target drive uses a 29pin SFF8482 SATA connector. Ensure the 0.5M length reaches between devices inside the chassis without strain.

Upgrade context

The cable replaces separate single-port harnesses when consolidating two SATA drives onto one 12Gbps lane. The jump is worthwhile when reducing cable count and improving airflow in dense storage enclosures.

Highlights

  • Connect two SATA drives via one Mini SAS HD SFF8644 port using the 2in1 SFF8482 29pin design
  • Achieve steady 12Gbps data transfer for SAS and SATA HDDs and SSDs
  • Maintain signal integrity with premium 28AWG lowloss copper harness construction
  • Route cleanly inside compact servers and NAS enclosures with the 0.5M length
  • Expand enterprise storage and build RAID arrays with wide SATA device compatibility

Specifications

No published specifications for this item yet.

Questions about this item

Does the cable include both SFF8482 connectors or must they be purchased separately?

The 2in1 cable arrives with one SFF8644 Mini SAS HD plug and two SFF8482 29pin SATA connectors already attached, so no extra parts are required for a dual-drive connection.

When should I choose the .5M length over a longer cable?

The .5M length is intended for tight server or NAS chassis where a short run keeps airflow clear and avoids excess cable bulk.

What does the 12Gbps rating mean for my SAS or SATA drives?

The harness supports up to 12Gbps bandwidth, allowing compatible SAS and SATA SSDs or HDDs to run at their full interface speed without cable bottlenecks.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.