We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 3 metre cable with SFF8644 plug splitting to two SFF8482 SATA connectors

SMUGDESK

SMUGDESK Mini SAS HD SFF8644 to SFF8482 29P 2in1 SATA Cable 28AWG 12Gbps 3M

SKU CH-7G6J-4TR3W

A 2-in-1 harness converts Mini SAS HD SFF8644 to dual SFF8482 29P SATA connectors for multi-drive server and NAS expansion

  • Connect two SATA drives from one Mini SAS HD port
  • 12 Gbps bandwidth handles fast storage traffic
  • 28 AWG pure copper wire cuts signal loss
  • Rugged harness built for server and NAS duty
  • 3 metre length reaches across full-height racks

SFF8644 to dual SFF8482 cable

This 3 metre harness converts a Mini SAS HD SFF8644 port into two SFF8482 29P SATA connectors for multi‑drive storage links. It uses 28AWG pure copper wire to carry 12Gbps SAS 3.0 bandwidth with low resistance and strong anti‑interference performance. The 118.11 inch length supports flexible routing inside server racks and storage enclosures. Designed for connecting SAS or SATA hard drives and SSDs to Mini SAS HD host controllers.

Before ordering check your controller

Verify that the host controller or RAID card presents a Mini SAS HD SFF8644 interface and supports SAS 3.0 12Gbps operation. Ensure the target drives use SFF8482 29P SATA connectors and that the 3 metre reach suits your cabinet layout. Confirm the 28AWG harness fits the available cable management space and that no tighter bend radius is required by your enclosure design. The 2in1 integrated design means both SATA connectors share the single SFF8644 link.

Suits server and NAS expansion

This cable suits administrators expanding storage in servers, NAS units or data‑centre racks where a Mini SAS HD port must feed two SATA drives. Builders needing more than two drives per port, or drives with a different connector type, should look elsewhere. Environments requiring a shorter or longer harness will need an alternative length. Buyers whose host controllers lack an SFF8644 interface cannot use this harness.

Highlights

  • Connect two SATA drives from one Mini SAS HD port
  • 12 Gbps bandwidth handles fast storage traffic
  • 28 AWG pure copper wire cuts signal loss
  • Rugged harness built for server and NAS duty
  • 3 metre length reaches across full-height racks

Specifications

No published specifications for this item yet.

Questions about this item

What connectors come on the SMUGDESK Mini SAS HD SFF8644 to SFF8482 29P 2in1 SATA Cable?

The cable has a Mini SAS HD SFF8644 connector on one end and two SFF8482 29P SATA connectors on the other, so no extra adapters are needed to link a controller to two drives.

How do I choose the right length and speed for my server rack?

The 3 metre length suits full-height rack runs and the 12 Gbps rating matches SAS 3.0 controllers, so pick this cable when your backplane and RAID card both support 12 Gbps.

What does the 12 Gbps rating mean when the cable is installed in a live array?

It means each of the two SATA lanes can carry up to 12 Gbps of raw SAS 3.0 bandwidth, giving full controller speed to both attached drives without throttling.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.