We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
1m Mini SAS HD SFF8643 to four right-angle SATA breakout cable

SMUGDESK

SMUGDESK Mini SAS HD SFF8643 to 4×RightAngle SATA 12Gbps 30AWG 1m Cable

SKU CH-KEW2-09B88

Converts a single SFF8643 Mini SAS HD port into four right-angle SATA connectors for multi-drive server connections at 12Gbps

  • Converts one SFF8643 port to four right-angle SATA drives
  • 30AWG pure copper wire harness enables stable 12Gbps SAS/SATA transmission
  • Right-angle SATA plugs optimise space-saving routing inside tight server chassis
  • 37in medium length fits standard rackmount servers and internal wiring
  • Server-grade shielded structure reduces interference for RAID arrays and NAS storage

Mini SAS HD SFF8643 Breakout Cable

This one metre cable converts a single SFF8643 Mini SAS HD port into four right angle SATA connectors. It is built for administrators who need to attach multiple drives inside a server or storage enclosure using a single high speed lane.

Right Angle SATA Connectors for Dense Chassis

The right angle SATA plugs allow tidy routing in tight rackmount servers and backplanes where straight connectors would block adjacent slots. Thirty AWG pure copper wire carries twelve Gbps SAS and SATA signals without the bulk of heavier gauge looms.

Shielded Construction for Sustained RAID Workloads

Server grade shielding suppresses electromagnetic interference during continuous multidrive RAID rebuilds and heavy NAS traffic. The cable maintains signal integrity over the full length so parity checks and scrubs complete without link retraining.

Highlights

  • Converts one SFF8643 port to four right-angle SATA drives
  • 30AWG pure copper wire harness enables stable 12Gbps SAS/SATA transmission
  • Right-angle SATA plugs optimise space-saving routing inside tight server chassis
  • 37in medium length fits standard rackmount servers and internal wiring
  • Server-grade shielded structure reduces interference for RAID arrays and NAS storage

Specifications

No published specifications for this item yet.

Questions about this item

Will the 30AWG copper conductors sustain 12Gbps SAS speeds over the 1m length under continuous load?

The 30AWG pure copper harness is built for low-loss signal transfer and is rated for stable 12Gbps SAS/SATA transmission across the full 1m run.

Does the shielded construction keep EMI low enough for all-day operation inside a dense RAID backplane?

A server-grade shielded structure reduces electromagnetic interference, making the cable suitable for continuous use in RAID arrays, NAS and enterprise storage systems.

Does my controller need an SFF8643 Mini SAS HD port to plug this breakout cable in?

Yes, the cable requires a single SFF8643 Mini SAS HD input on the host side to fan out to four right-angle SATA connectors.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.