We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue internal breakout cable with HD SFF-8643 plug, four SFF-8482 connectors and SATA power lead

SMUGDESK

SMUGDESK Mini SAS HD SFF-8643 to SFF-8482 29Pin SATA Power Cable 1M

SKU CH-ZFMS-RSENB

Connects RAID controllers to SAS or SATA drives with integrated power delivery over one metre

  • HD SFF-8643 to SFF-8482 breakout links RAID controller to SAS/SATA drives
  • Integrated SATA power connector delivers data and power simultaneously for simpler wiring
  • 29Pin standard interface ensures stable high-speed signal transmission for storage systems
  • 1M length allows flexible internal routing inside server chassis and storage cases
  • Shielded conductors reduce electromagnetic interference for reliable performance in NAS, RAID and enterprise storage

HD SFF-8643 to SFF-8482 breakout cable

This internal Mini SAS fan-out cable connects a RAID host controller with an HD SFF-8643 port to SAS or SATA hard drives using SFF-8482 29Pin connectors. An integrated SATA power port delivers power to the drives without extra cords. The one-metre length suits server chassis and NAS enclosures. Shielded conductors reduce electromagnetic interference for reliable data transmission.

Replaces separate data and power cables

The breakout design combines four drive connections and power in a single assembly, removing the need for individual SAS data cables and SATA power leads. Upgrading is worthwhile when rebuilding a storage server, expanding a RAID array or converting a chassis to higher-density drives. It simplifies cable routing in tight enclosures and reduces failure points during long-term operation.

Check controller port and drive connectors

Verify the RAID controller presents an HD SFF-8643 male port and that each target drive uses an SFF-8482 29Pin interface. Confirm the power supply can feed the SATA power connector on the cable. Ensure the one-metre reach matches the internal layout between controller and drive bays. This cable does not support drives requiring a different connector type.

Highlights

  • HD SFF-8643 to SFF-8482 breakout links RAID controller to SAS/SATA drives
  • Integrated SATA power connector delivers data and power simultaneously for simpler wiring
  • 29Pin standard interface ensures stable high-speed signal transmission for storage systems
  • 1M length allows flexible internal routing inside server chassis and storage cases
  • Shielded conductors reduce electromagnetic interference for reliable performance in NAS, RAID and enterprise storage

Specifications

No published specifications for this item yet.

Questions about this item

Will the HD SFF-8643 end fit my RAID controller's internal port?

Yes, the HD SFF-8643 male connector plugs directly into the controller's matching internal port.

Do I plug the SATA power connector into the drive or the power supply?

Connect the SATA power plug to your power supply; the SFF-8482 29Pin end carries both data and power to the drive.

If the SATA power lead fails later, can I replace just that section?

The power lead is moulded into the cable assembly, so the whole cable must be swapped.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.