We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Mini SAS HD SFF-8643 plug splitting to four SATA 7-pin female connectors, 19.68in shielded cable

SMUGDESK

SMUGDESK Mini SAS HD SFF-8643 to 4×SATA 19.68in

SKU CH-F1E5-BS9MF

Converts one Mini SAS HD 8643 port into four SATA connectors for multi-drive server expansion at 19.68in length

  • Converts one Mini SAS HD SFF8643 port into four SATA 7pin female connectors
  • Highspeed signal transmission compatible with RAID controllers, hard drive backplanes and NAS storage
  • 68inch optimized length for tidy cable routing inside compact server chassis
  • Durable shielded internal wiring minimizes electromagnetic interference for stable longterm data transfer
  • Plugandplay design ideal for connecting SATA-based HDDs and SSDs to Mini SAS HD equipped hardware

Server breakout cable

This internal cable converts a single Mini SAS HD SFF-8643 host port into four SATA 7-pin female connectors. It is built for server and storage hardware that uses this specific interface to attach multiple drives. The 19.68inch length supports tidy routing inside compact chassis and enclosures. Shielded wiring is designed to minimise electromagnetic interference during data transfer.

Fits SATA drives on Mini SAS HD controllers

Installers connecting SATA-based HDDs or SSDs to a Mini SAS HD SFF-8643 port on a RAID controller, backplane or NAS will find this cable matches the requirement. It is not suitable for builds that need a different SAS connector standard, external cabling, or drive interfaces other than SATA.

SFF-8643 to four SATA 7-pin

The decisive specification is the Mini SAS HD SFF-8643 input breaking out to four SATA 7-pin female outputs at a fixed 19.68inch length. Verify that the controller or backplane presents an SFF-8643 port and that the target drives use standard SATA connectors before purchasing.

Highlights

  • Converts one Mini SAS HD SFF8643 port into four SATA 7pin female connectors
  • Highspeed signal transmission compatible with RAID controllers, hard drive backplanes and NAS storage
  • 68inch optimized length for tidy cable routing inside compact server chassis
  • Durable shielded internal wiring minimizes electromagnetic interference for stable longterm data transfer
  • Plugandplay design ideal for connecting SATA-based HDDs and SSDs to Mini SAS HD equipped hardware

Specifications

No published specifications for this item yet.

Questions about this item

How can I verify the SFF-8643 breakout cable is transmitting data correctly after connecting four drives?

Check that the RAID controller or backplane detects all four attached SATA drives at full link speed and run a short surface scan to confirm error-free reads across each device.

What connectors are included on the 19.68inch cable and do I need any extra adapters for standard SATA drives?

The cable has one Mini SAS HD SFF-8643 plug on the host side and four SATA 7-pin female receptacles on the drive side; standard SATA data cables plug directly into those receptacles with no additional adapters required.

Should I choose a different length or a straight Mini SAS HD to Mini SAS HD cable instead of this breakout?

Select this 19.68inch breakout when the controller has a single SFF-8643 port and you need to attach up to four individual SATA drives; choose a different length only if chassis routing demands it, and a straight cable only if the target device also uses Mini SAS HD.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.