We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue 2 metre fanout cable with one SFF8088 plug splitting to four SATA sockets

SMUGDESK

SMUGDESK Mini SAS HD SFF-8088 26Pin to 4×SATA 7Pin Female Fanout Cable 2M

SKU CH-358C-MW70X

Breaks out one SFF-8088 port into four SATA connections for 6 Gbps server storage expansion over two metres

  • Converts one SFF-8088 port into four SATA drives for multi-drive expansion
  • Delivers stable 6Gbps bandwidth for enterprise server storage and RAID arrays
  • 28AWG pure copper with 10ohm impedance matching minimizes signal loss and crosstalk
  • Female SATA connectors enable plug-and-play HDD or SSD connection
  • 2meter length suits large rackmount server wiring scenarios

Server Storage Connectivity

This Mini SAS HD SFF8088 26Pin to 4×SATA 7Pin Female Fanout Cable converts a single external Mini SAS HD port into four SATA connections for multi-drive expansion. It supports 6Gbps high-speed data transfer across enterprise server storage and RAID arrays. The 28AWG pure copper conductors with precise 10ohm impedance matching minimise signal loss and crosstalk for reliable operation.

Rackmount Server Builders

The 2meter length suits large-scale rackmount server wiring scenarios and long-distance storage layouts. Builders needing internal chassis connections or shorter cable runs should consider alternative form factors. Systems without a Mini SAS HD SFF8088 host port cannot use this cable.

Critical Interface Match

The cable requires a Mini SAS HD SFF8088 26Pin port on the controller or backplane to function. Verify your host hardware presents this exact connector before purchasing. No other interface will mate with the SFF8088 plug.

Highlights

  • Converts one SFF-8088 port into four SATA drives for multi-drive expansion
  • Delivers stable 6Gbps bandwidth for enterprise server storage and RAID arrays
  • 28AWG pure copper with 10ohm impedance matching minimizes signal loss and crosstalk
  • Female SATA connectors enable plug-and-play HDD or SSD connection
  • 2meter length suits large rackmount server wiring scenarios

Specifications

No published specifications for this item yet.

Questions about this item

How long will the 28AWG pure copper conductors last before signal degradation requires cable replacement?

The 28AWG pure copper conductors with 10ohm impedance control are built for stable long-term operation in server environments; replace only if physical damage or intermittent connectivity appears.

What limits sustained 6Gbps throughput when all four SATA drives are active simultaneously?

Aggregate bandwidth is constrained by the single SFF8088 26pin link, so simultaneous full-speed operation on all four ports shares the available 6Gbps channel capacity.

Does the 2meter cable generate noticeable heat or power draw during continuous all-day RAID array operation?

Passive copper construction draws no additional power and produces negligible heat; the 10ohm impedance matching minimises signal loss without active components.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.