We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short .5 m breakout cable with 26 pin Mini SAS HD SFF-8088 plug splitting to four SATA 7 pin female sockets, 28 AWG wire

SMUGDESK

SMUGDESK Mini SAS HD SFF-8088 26P to 4×SATA 7P .5M 28AWG 10 Ohm

SKU CH-Y1CQ-JBRJJ

A 0.5 m breakout cable converts one Mini SAS HD SFF-8088 26-pin port to four SATA 7-pin female connectors with 10 ohm impedance and 28 AWG copper for 6 Gbps SAS-compatible multi-drive connections

  • Converts one SFF-8088 26-pin Mini SAS HD port into four SATA 7-pin ports for multi-drive expansion
  • 10 Ohm impedance matching maintains signal integrity during high-speed SAS transfers
  • 6 Gbps bandwidth supports enterprise HDDs, SSDs and RAID storage systems
  • 28 AWG copper construction reduces signal loss and crosstalk
  • 5 m compact length enables tidy short-range routing inside rackmount servers and enclosures

Server Storage Expansion

This 1to4 breakout cable converts a single externalstyle SFF8088 26pin Mini SAS HD port into four SATA 7pin female connectors. It enables multidrive expansion for RAID controllers, NAS devices and enterprise storage deployments requiring highspeed connectivity.

Port Compatibility Check

Verify that your host controller or backplane provides an external Mini SAS HD SFF8088 26pin interface before ordering. Ensure the target drives use standard SATA 7pin connectors and that the .5M length suits your internal rackmount routing requirements.

Upgrade From Legacy Cables

Replaces older breakout cables lacking 10ohm impedance matching and 28AWG copper construction for cleaner signal integrity. The jump is worthwhile when deploying 6Gbps SAScompatible HDDs or SSDs where signal stability and reduced crosstalk are critical.

Highlights

  • Converts one SFF-8088 26-pin Mini SAS HD port into four SATA 7-pin ports for multi-drive expansion
  • 10 Ohm impedance matching maintains signal integrity during high-speed SAS transfers
  • 6 Gbps bandwidth supports enterprise HDDs, SSDs and RAID storage systems
  • 28 AWG copper construction reduces signal loss and crosstalk
  • 5 m compact length enables tidy short-range routing inside rackmount servers and enclosures

Specifications

No published specifications for this item yet.

Questions about this item

What connectors are on the cable and do I need any extra parts?

The cable has a Mini SAS HD SFF-8088 26P plug on one end and four SATA 7P female connectors on the other. No extra adapters are required for a direct link.

Should I pick a different length or gauge for my server?

This version is .5M long and built with 28AWG copper. Choose it when you need a short, low-loss run inside a rackmount chassis.

Will the 6Gbps rating give me full speed on my RAID card?

The cable supports 6Gbps SAS-compatible transfer with 10 Ohm impedance matching, so it maintains signal integrity for enterprise HDDs, SSDs and RAID arrays.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.