SMUGDESK
SMUGDESK Mini PCIe to Dual RJ45 Gigabit Ethernet Card
Adds two gigabit RJ45 ports via Mini PCIe with link aggregation, VLAN tagging and Wake-on-LAN for embedded and industrial systems
- Adds two independent gigabit RJ45 ports via Mini PCIe slot
- Hardware checksum offload and jumbo frame support reduce CPU load
- Wake-on-LAN enables remote power-up for embedded systems
- IEEE 802.3 compliant with 802.1Q VLAN tagging for managed networks
- Compact form factor fits industrial motherboards and mini ITX devices
Dual Gigabit Expansion via Mini PCIe
This adapter adds two independent RJ45 ports through a single Mini PCIe slot, delivering auto-negotiated 10/100/1000Mbps connectivity for industrial motherboards and embedded devices. It targets system integrators and OEMs who need wired network expansion without redesigning the host board.
Link aggregation and VLAN support with hardware
The onboard network controller handles checksum offload, jumbo frames and Wake-on-LAN to lower CPU load, while IEEE 802.3 compliance and 802.1Q VLAN tagging enable managed-network features such as link aggregation and redundancy. Throughput caps at gigabit line rate per port, so multi-gigabit or 10GbE workloads are beyond its reach.
Fits compact embedded builds running Windows
The Mini PCIe form factor suits space-constrained platforms such as mini-ITX appliances, industrial control hosts and notebook expansion slots, provided a free Mini PCIe lane is available. Driver support spans Windows, Linux and common embedded OSes, freeing developers from writing custom network stacks for basic connectivity.
Highlights
- Adds two independent gigabit RJ45 ports via Mini PCIe slot
- Hardware checksum offload and jumbo frame support reduce CPU load
- Wake-on-LAN enables remote power-up for embedded systems
- IEEE 802.3 compliant with 802.1Q VLAN tagging for managed networks
- Compact form factor fits industrial motherboards and mini ITX devices
Specifications
No published specifications for this item yet.
Questions about this item
Will the Mini PCIe slot on my existing industrial motherboard provide enough bandwidth for both 1000Mbps ports simultaneously?
The card uses the Mini PCIe standard interface to deliver two independent RJ45 ports, each auto-negotiating at 10/100/1000Mbps, and supports link aggregation to combine throughput.
How can I confirm the dual RJ45 ports are negotiating at 1000Mbps and that Wake-on-LAN is active after installation?
Check the link LEDs on each RJ45 port for gigabit indication, then verify 1000Mbps speed and Wake-on-LAN status in the OS network adapter properties or ethtool output.
Does the package include the low-profile bracket and internal antenna cables, or must I source them separately?
The card is supplied as the Mini PCIe PCB with dual RJ45 ports only; mounting brackets and any internal cabling for the host chassis are not included.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



