SMUGDESK
SMUGDESK MCIO PCIe SAS SFF-8654 8i 74-Pin to 8×SATA 7-Pin 90° Cable .8m 32AWG
Converts one SFF-8654 8i 74-pin port into eight SATA 7-pin female ports using a 90-degree .8 m 32AWG cable for dense server storage expansion
- 90° right-angle connector fits tight server chassis
- 74-pin SFF-8654 8i port splits to eight SATA drives
- 32AWG copper wire keeps data stable under heavy RAID loads
- .8 m length suits short internal runs in dense enclosures
- Female plug-and-play ends speed up multi-drive storage upgrades
Right-angle cable for dense server builds
This .8 meter adapter converts a single MCIO PCIe SAS SFF-8654 8i 74-pin port into eight SATA 7-pin female connections, enabling massive multi-drive storage expansion inside compact rack servers and workstations. The 90-degree angled connector optimises tight-space routing and improves internal airflow where straight cables would obstruct neighbouring components.
Stable throughput under heavy RAID loads
Constructed with 32AWG low-loss pure copper conductors, the cable minimises signal attenuation and crosstalk during sustained high-bandwidth data transfers across all eight drives simultaneously. The female-end plug-and-play design maintains consistent electrical contact without signal degradation when drives are continuously accessed in enterprise storage systems and JBOD enclosures.
Passive design eliminates active cooling needs
The short .8 metre length and pure copper construction keep resistive losses low, so the adapter adds negligible heat inside high-density server chassis. No onboard electronics or active components mean zero fan noise and no additional power draw beyond the drives themselves, simplifying thermal management in tightly packed rack environments.
Highlights
- 90° right-angle connector fits tight server chassis
- 74-pin SFF-8654 8i port splits to eight SATA drives
- 32AWG copper wire keeps data stable under heavy RAID loads
- .8 m length suits short internal runs in dense enclosures
- Female plug-and-play ends speed up multi-drive storage upgrades
Specifications
No published specifications for this item yet.
Questions about this item
Does the 32AWG copper construction keep the cable cool and power-efficient when running all day in a server?
The 32AWG low-loss copper conductors minimise signal attenuation and crosstalk under heavy RAID workloads, reducing the electrical losses that generate heat during continuous operation.
What controller port must my system already have to plug this cable in?
Your server or workstation needs a single MCIO PCIe SAS SFF-8654 8i 74-pin port to accept the cable's primary connector.
Will the 90-degree SATA ends fit older 3.5-inch drives mounted in tight backplanes?
Yes, the right-angle SATA 7-pin female connectors are designed for dense chassis, letting you route cables neatly alongside legacy drives without blocking adjacent slots.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



