SMUGDESK
SMUGDESK M.2 NVMe to Mini SAS SFF8087 4-Port SATA 3.0 Adapter
Converts an M.2 NVMe slot into four SATA 3.0 6Gbps ports via Mini SAS SFF8087 for multidrive storage in compact systems
- Converts M.2 NVMe slot to four SATA 3.0 6Gbps ports via Mini SAS SFF8087
- Supports 2.5 and 3.5 HDDs and SSDs with highspeed SATA III bandwidth
- Durable PCB and stable controller ensure reliable continuous heavyload operation
- Compact M.2 form factor fits miniPC, NAS and small server builds
- Plugandplay Windows and Linux compatibility ideal for RAID arrays and massstorage expansion
M.2 NVMe to SATA expansion
This adapter converts an M.2 NVMe slot into four SATA 3.0 6Gbps ports using a Mini SAS SFF8087 breakout interface. It targets builders adding multidrive storage to compact NAS units, mini servers or small form factor systems. The card supports both 2.5 and 3.5 inch HDDs and SSDs for flexible mass storage expansion. It works plug and play with Windows and Linux for RAID array deployment.
Thermals and power profile
The compact M.2 form factor fits inside tight chassis without additional power connectors or active cooling. Passive operation keeps noise at zero while the durable PCB handles continuous heavy load data transfers. Stable controller design maintains consistent throughput across all four SATA 3.0 ports during sustained workloads. Power draw scales with the number of attached drives rather than the adapter itself.
Build quality and daily use
A sturdy circuit board and reliable controller ensure long term durability for always on storage servers. The Mini SAS SFF8087 connector accepts standard breakout cables for clean cable routing to four drives. M.2 mounting secures the card directly to the motherboard without occupying a PCIe slot. This layout suits space constrained builds where internal drive bays are limited but an M.2 NVMe slot is available.
Highlights
- Converts M.2 NVMe slot to four SATA 3.0 6Gbps ports via Mini SAS SFF8087
- Supports 2.5 and 3.5 HDDs and SSDs with highspeed SATA III bandwidth
- Durable PCB and stable controller ensure reliable continuous heavyload operation
- Compact M.2 form factor fits miniPC, NAS and small server builds
- Plugandplay Windows and Linux compatibility ideal for RAID arrays and massstorage expansion
Specifications
No published specifications for this item yet.
Questions about this item
How do I install the SMUGDESK adapter into an M.2 NVMe slot, and what step is often missed?
Insert the card firmly into the M.2 NVMe slot, secure it with the mounting screw, then connect the SFF8087 breakout cable to the card and attach up to four SATA 3.0 6Gbps drives. The step often missed is fastening the retention screw, which keeps the card seated under vibration.
What maintenance or replacement will the SMUGDESK M.2 NVMe to Mini SAS SFF8087 4-Port SATA 3.0 Adapter need over time?
The adapter itself has no moving parts and requires no scheduled maintenance. You may need to replace the SFF8087 breakout cable or individual SATA 3.0 6Gbps data cables if connectors wear or locking clips break after repeated drive swaps.
What limit appears first when the SMUGDESK adapter runs four drives under sustained heavy load?
The single M.2 NVMe upstream link caps total throughput, so combined read/write across all four SATA 3.0 6Gbps ports cannot exceed that upstream bandwidth. In sustained heavyload RAID workloads this bottleneck shows up before any perport SATA 3.0 6Gbps limit.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114437BTC
In stock
