We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
SMUGDESK M.2 MKey to SFF8643 SAS HD 90Degree Cable 0.5M 12Gbps 30AWG

SMUGDESK

SMUGDESK M.2 MKey to SFF8643 SAS HD 90Degree Cable 0.5M 12Gbps 30AWG

SKU CH-YS9W-Z9EYN

Connects M.2 NVMe drives to SFF8643 SAS ports with a 90degree angled 12Gbps cable

  • Converts M.2 MKey NVMe to SFF8643 SAS HD for flexible enterprise storage expansion
  • 90degree angled connector saves internal space and improves airflow in compact server chassis
  • 30AWG lowloss pure copper wire delivers stable 12Gbps highspeed data transmission
  • Plugandplay design enables quick integration with RAID controllers and highperformance NAS
  • 5M short length allows tidy internal routing in highdensity rack servers

Interface Bridge

This SMUGDESK adapter cable bridges an M.2 MKey NVMe interface to an SFF8643 SAS HD port. It enables direct connection of M.2 storage devices to SAS-based RAID controllers. The 90degree angled connector saves space inside compact server and workstation chassis. Plugandplay operation simplifies installation for storage expansion.

Fit and Limits

Suits builders adding M.2 NVMe drives to existing SAS infrastructure in dense rack servers or highperformance NAS units. The 0.5M length and 30AWG copper conductors support tidy internal routing at 12Gbps speeds. Buyers needing longer cable runs for external enclosures or larger chassis should look elsewhere. Systems requiring different connector orientations or pinouts also fall outside this design.

Deciding Specification

The single specification that decides fit is the M.2 MKey NVMe to SFF8643 SAS HD interface conversion. Only motherboards or controllers presenting an MKey NVMe lane can use this cable. The 90degree angle and 12Gbps rating are fixed by the 30AWG construction. Verify the host side provides an MKey NVMe signal before purchase.

Highlights

  • Converts M.2 MKey NVMe to SFF8643 SAS HD for flexible enterprise storage expansion
  • 90degree angled connector saves internal space and improves airflow in compact server chassis
  • 30AWG lowloss pure copper wire delivers stable 12Gbps highspeed data transmission
  • Plugandplay design enables quick integration with RAID controllers and highperformance NAS
  • 5M short length allows tidy internal routing in highdensity rack servers

Specifications

No published specifications for this item yet.

Questions about this item

What speed does the M.2 MKey to SFF8643 cable actually deliver?

The cable supports 12Gbps SAS bandwidth when used with a compatible controller and NVMe drive.

How much clearance does the 90degree connector need inside a server chassis?

The rightangle plug sits flush against the board edge, saving vertical space in dense 1U or compact workstation builds.

Which side plugs in first when installing the adapter cable?

Seat the M.2 MKey end into the motherboard slot and secure the screw, then attach the SFF8643 SAS HD connector to the RAID card.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.