We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black cable with one large four-pin plug branching to six flat SATA connectors

SMUGDESK

SMUGDESK LP4 4 Pin IDE to 6 x 15 Pin SATA Power Splitter Cord

SKU CH-NQ8E-Z305F

Converts one Molex connector into six SATA power outputs for multiple drives

  • Convert one Molex into six SATA power outputs
  • Supports HDDs, SSDs and optical drives together
  • High-conductivity wire core delivers stable multi-drive power
  • Locking SATA plugs prevent accidental disconnects under vibration
  • Adds SATA power ports without replacing the PSU

LP4 to six SATA power outputs

This adapter converts a single LP4 4-pin Molex connector into six 15-pin SATA power connectors. It is designed for desktop PC builders and small server assemblers who need to add multiple drives. The cable supports hard disk drives, solid state drives and optical drives simultaneously. It provides a quick internal upgrade without replacing the existing power supply unit.

Limited by the source Molex rating

The total power available to all six SATA devices depends entirely on the capacity of the original LP4 4-pin Molex rail. The adapter itself does not increase the wattage delivered by the power supply. Builders must verify that the PSU can supply enough rated power for every connected drive. Exceeding the source connector's limit can cause instability or hardware malfunction.

Locking SATA connectors prevent accidental

Each of the six 15-pin SATA plugs features a locking mechanism that holds the terminal firmly in place. This design resists vibration inside the chassis during long-term operation. Secure connections reduce the risk of sudden power loss to storage devices. The reinforced connector roots also withstand repeated bending during installation and maintenance.

Highlights

  • Convert one Molex into six SATA power outputs
  • Supports HDDs, SSDs and optical drives together
  • High-conductivity wire core delivers stable multi-drive power
  • Locking SATA plugs prevent accidental disconnects under vibration
  • Adds SATA power ports without replacing the PSU

Specifications

No published specifications for this item yet.

Questions about this item

Should I choose a single splitter or daisy-chain several for more drives?

One cable converts a single Molex port into six SATA power plugs, so a single unit already supports up to six drives.

What does the six-output spec mean once the cable is installed in my PC?

It lets you power six SATA devices — HDDs, SSDs or optical drives — from one Molex connector on the power supply.

Which interface does the splitter use and what does it limit in practice?

The input is a standard LP4 4-pin Molex and the outputs are 15-pin SATA; total draw is limited by the PSU's Molex rail rating.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.