SMUGDESK
SMUGDESK IDE 4Pin to 3×SATA 15Pin Power Splitter Cord 22cm
Converts one IDE 4-pin Molex connector into three SATA 15-pin power ports for 2.5 and 3.5-inch drives, using a 22 cm cable with tinned copper wiring
- Converts one Molex connector into three SATA power ports for simultaneous drive operation
- 22cm length reduces internal cable clutter and simplifies chassis layout
- Tinned copper conductors with thick PVC insulation deliver stable power and minimise voltage loss
- Works with 2.5 and 3.5 inch HDDs, SATA SSDs and optical drives on standard ATX supplies
- Molded strain-relief connectors prevent accidental disconnection and require no drivers or software
Converts One Molex to Three SATA Power Ports
This power splitter cable turns a single IDE 4-pin Molex male connector from an ATX power supply into three independent SATA 15-pin female ports. It enables simultaneous power delivery for multiple storage devices without additional cables. The 22 cm length keeps internal wiring tidy and simplifies component layout inside the chassis. High-purity tinned copper conductors with thick PVC insulation provide stable voltage and reduce power loss.
Ideal for Storage Expansion on Older PSUs
Builders adding several 2.5-inch or 3.5-inch hard drives, SATA SSDs or optical drives will find the three-port layout practical when the power supply lacks enough native SATA connectors. Molded strain-relief connectors resist accidental disconnection during upgrades or maintenance. The plug-and-play design requires no drivers or software configuration. Not suited for systems that already offer ample SATA power headers or for drives needing a different power interface.
22 cm Cable Length for Clean Routing
The fixed 22-centimeter length is the key dimension that determines fit inside compact or full-size cases. It provides enough reach to span typical drive bays while avoiding the slack that creates cable clutter and obstructs airflow. Buyers should measure the distance from their Molex connector to the furthest drive to confirm this length meets their routing needs.
Highlights
- Converts one Molex connector into three SATA power ports for simultaneous drive operation
- 22cm length reduces internal cable clutter and simplifies chassis layout
- Tinned copper conductors with thick PVC insulation deliver stable power and minimise voltage loss
- Works with 2.5 and 3.5 inch HDDs, SATA SSDs and optical drives on standard ATX supplies
- Molded strain-relief connectors prevent accidental disconnection and require no drivers or software
Specifications
No published specifications for this item yet.
Questions about this item
Will the 22cm cable reach from my ATX PSU Molex port to drives mounted in a standard mid-tower case?
The 22cm length is designed for tidy internal routing in typical ATX chassis and reaches most 2.5 or 3.5 inch drive bays without excess slack.
How can I verify each SATA 15Pin port is delivering stable power after I plug in my HDDs or SSDs?
Check that every connected drive spins up and is recognised in BIOS or the operating system, confirming steady voltage across all three ports.
Does the package include the Molex-to-SATA splitter only, or are mounting screws and extra cables also supplied?
Only the IDE 4Pin male to 3×SATA 15Pin female splitter cord is included; mounting hardware and additional cables must be purchased separately.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115352BTC
In stock
