We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Combo eSATA USB cable with 4Pin IDE power to SATA 22Pin female adapter for 2.5 and 3.5 drives

SMUGDESK

SMUGDESK eSATA+USB Combo IDE Cable 4Pin IDE to SATA 22Pin (7+15Pin) 5V 12V 2.5" 3.5

SKU CH-9A25-SH48W

Connects 2.5" or 3.5" SATA drives via eSATA with 4-pin IDE power delivering 5V and 12V

  • Combo eSATA + USB design converts eSATA and 4Pin IDE power to SATA 22Pin female interface
  • Supplies stable 5V and 12V power for both 2.5" and 3.5" SATA hard drives
  • Transmits SATA data via eSATA while IDE 4Pin connector provides sufficient drive power
  • Compact integrated cable simplifies external enclosure and DIY storage wiring
  • Reliable wiring structure prevents insufficient power and hard disk recognition failure

Connectivity & Power

This SMUGDESK adapter cable converts an eSATA data link and a 4Pin IDE power source into a standard SATA 22Pin (7+15Pin) female connector. It enables SATA hard drives to connect to systems or enclosures that provide eSATA and legacy IDE power outputs.

Drive compatibility

The cable supplies stable 5V and 12V power, making it suitable for both 2.5-inch laptop drives and 3.5-inch desktop mechanical drives that require higher startup current. Builders needing a purely USB-powered solution or an internal motherboard SATA header should look elsewhere.

Critical requirement

The 4Pin IDE power source must deliver sufficient rated current for the target 3.5-inch drive; otherwise spin-up failures or disconnections will occur. Verify the power supply capability before relying on this adapter for desktop hard disks.

Highlights

  • Combo eSATA + USB design converts eSATA and 4Pin IDE power to SATA 22Pin female interface
  • Supplies stable 5V and 12V power for both 2.5" and 3.5" SATA hard drives
  • Transmits SATA data via eSATA while IDE 4Pin connector provides sufficient drive power
  • Compact integrated cable simplifies external enclosure and DIY storage wiring
  • Reliable wiring structure prevents insufficient power and hard disk recognition failure

Specifications

No published specifications for this item yet.

Questions about this item

Will the 4-pin IDE power connector need replacement over time?

The 4-pin IDE power connector is a standard Molex-style plug rated for repeated mating cycles; no scheduled replacement is required unless the pins become bent or the housing cracks.

What limits sustained data transfer when the cable runs all day?

The eSATA link caps throughput at the SATA bus rate, so the interface itself is the first bottleneck under continuous heavy I/O.

How much heat does the adapter generate during all-day operation?

The passive cable assembly produces negligible heat; only the attached drive and the host port contribute measurable temperature rise.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.