SMUGDESK
SMUGDESK DP 1.4 Fibre Optic Cable 164ft 8K@60Hz 4K@144Hz
A 164 ft fibre-optic DisplayPort 1.4 cable delivering 32.4 Gbps bandwidth for 8K at 60 Hz or 4K at 144 Hz gaming
- 8K resolution at 60 Hz for ultra-sharp detail
- 4K at 144 Hz refresh for smooth competitive gaming
- 164 ft fibre reach without signal loss
- VESA certified DP 1.4 with 32.4 Gbps bandwidth
- Gold-plated connectors resist corrosion for lasting reliability
SMUGDESK DP 1.4 Fibre Optic Cable 164ft
This unidirectional DisplayPort 1.4 fibre optic cable spans 164 feet and is built for high-resolution video and audio transmission. It is VESA certified and carries HBR3 bandwidth of 32.4 Gbps with DSC 1.2 support. The cable connects PCs or laptops to monitors, projectors or HDTVs.
Suits long runs needing 8K 60 Hz or 4K 144 Hz
Installers running cables through walls or across large rooms will benefit from the fibre construction and 164-foot reach. Users with shorter distances or standard DisplayPort copper limits should consider a conventional cable instead.
Single spec that decides fit: 164-foot fibre reach
If the installation requires a 164-foot DisplayPort link at 8K 60 Hz or 4K 144 Hz, this cable meets that requirement. If the run is shorter or the bandwidth need is lower, a copper alternative may be simpler.
Highlights
- 8K resolution at 60 Hz for ultra-sharp detail
- 4K at 144 Hz refresh for smooth competitive gaming
- 164 ft fibre reach without signal loss
- VESA certified DP 1.4 with 32.4 Gbps bandwidth
- Gold-plated connectors resist corrosion for lasting reliability
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
Same family, different memory, cooler or clock — compare before you commit.
Questions about this item
What DisplayPort version must my graphics card and monitor support to use this 164ft cable at 8K@60Hz?
Both devices need a DisplayPort 1.4 port with HBR3 and DSC 1.2 support to achieve 8K@60Hz over this fibre optic link.
Will this cable work with my older DisplayPort 1.2 monitor at 4K@60Hz?
Yes, the cable is backwards compatible with DisplayPort 1.3, 1.2 and 1.1, so a 4K@60Hz signal will pass without issue.
How can I confirm the link is running at 4K@144Hz after connecting the cable?
Check your monitor’s on-screen display or GPU control panel; it should report 3840x2160 at 144Hz with HDR10 active if the source is configured accordingly.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.








