We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
90 degree down angled USB 3.0 Type A to Micro B cable 3.0m with panel mount screws

SMUGDESK

SMUGDESK 90 Degree Down-Angled USB 3.0 Type-A to Micro-B Cable with Panel Mount Screws 3.0m

SKU CH-761G-FV7CZ

A 3.0 m USB 3.0 Micro-B cable with a 90° down-angled plug and panel-mount screws for secure, vibration-resistant industrial camera and machine-vision installations

  • 90° down-angled connector prevents upward cable strain in bottom-mount setups
  • USB 3.0 high-speed transfer keeps industrial camera feeds stable and real-time
  • Panel-mount screws lock the cable in place for vibration-proof security
  • 0 m length allows tidy routing across machine-vision and surveillance rigs
  • Heavy-duty shielding blocks electromagnetic interference for long-term reliability

90 Degree Down-Angled USB 3.0 Cable

This 3.0 metre cable connects USB 3.0 Type-A hosts to Micro-B devices using a 90 degree down-angled plug. Panel mount screws secure the connector for vibration resistant industrial camera and machine vision installations.

Replaces Straight Cables in Tight Panels

The angled design removes upward cable bend that stresses straight connectors in bottom mount enclosures. The jump is worth it when panel depth is limited or when equipment vibration risks disconnection over time.

USB 3.0 Length and Shielding Limits

The 3.0 metre length meets the USB 3.0 electrical specification without active signal boosting. Heavy duty shielding resists electromagnetic interference but longer runs would require a repeater or active cable not supplied here.

Highlights

  • 90° down-angled connector prevents upward cable strain in bottom-mount setups
  • USB 3.0 high-speed transfer keeps industrial camera feeds stable and real-time
  • Panel-mount screws lock the cable in place for vibration-proof security
  • 0 m length allows tidy routing across machine-vision and surveillance rigs
  • Heavy-duty shielding blocks electromagnetic interference for long-term reliability

Specifications

No published specifications for this item yet.

Questions about this item

How much clearance does the 90 degree down-angled connector need below the port?

The 90 degree down-angled connector points straight down so the cable runs parallel to the panel, removing the upward bend that a straight plug would need.

What is the step people miss when they install the panel mount screws?

The screws thread into the connector flange itself; you must fasten them before routing the cable or the flange can rotate and strip the threads.

When should the 3.0 m shielded cable be replaced in a high-vibration machine vision rig?

Replace it if the outer jacket shows abrasion, the screw heads loosen repeatedly or intermittent data errors appear during continuous capture.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.