SMUGDESK
SMUGDESK 8K DisplayPort Fiber Optic Cable 33ft 10m 1.4 Male to Male
Transmits 8K at 60 Hz and 4K at 144 Hz over 10 metres using fiber optics for stable, long-distance DisplayPort 1.4 connections
- Supports 8K 7680×4320 at 60 Hz for ultra-sharp visuals
- Delivers 4K at 144 Hz and 240 Hz for smooth high-refresh gaming
- 4 Gbps bandwidth over 10 m fiber link with zero signal loss
- Gold-plated connectors and zinc-alloy shells resist wear and corrosion
- Slim hybrid fiber-copper design fits tight spaces and in-wall runs
8K DisplayPort Fiber Optic Cable 10m
The SMUGDESK cable is a DisplayPort 1.4 fiber optic link rated for 32.4 Gbps. It carries 8K at 60 Hz and 4K at 144 Hz or 240 Hz, plus lower resolutions such as 3440x1440 and 2550x1440. Gold-plated connectors and a hybrid glass-fibre plus copper construction provide stable long-distance transmission.
For 8K or high-refresh 4K displays over 10 metres
Suits builders routing a signal through walls or tight conduits where copper cables are too stiff or distance-limited. The slim, flexible jacket eases installation in confined spaces. Not for buyers who need a shorter copper cable, those whose GPU or monitor lacks DisplayPort 1.4 support, or anyone requiring HDMI or USB-C endpoints.
Simple directional plug-and-play
One end is marked Source for the graphics card or laptop, the other marked Display for the monitor or projector; reversing them breaks the link. The TPE jacket resists kinking but the fibre cores must not be bent sharply. No drivers or external power are required, though both devices must support the target resolution and refresh rate.
Highlights
- Supports 8K 7680×4320 at 60 Hz for ultra-sharp visuals
- Delivers 4K at 144 Hz and 240 Hz for smooth high-refresh gaming
- 4 Gbps bandwidth over 10 m fiber link with zero signal loss
- Gold-plated connectors and zinc-alloy shells resist wear and corrosion
- Slim hybrid fiber-copper design fits tight spaces and in-wall runs
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
Same family, different memory, cooler or clock — compare before you commit.
SMUGDESK DisplayPort Cable 15m 50ft 8K 60Hz 4K 144Hz 32.4Gbps Optical Fiber
Questions about this item
Does my graphics card need a DisplayPort 1.4 output to use the 32.4 Gbps bandwidth of this cable?
Yes, both the graphics card and the monitor must support DisplayPort 1.4 to reach the full 32.4 Gbps bandwidth and enable 8K at 60 Hz or 4K at 144 Hz.
Will this cable still work if I connect it to a monitor that only supports DisplayPort 1.2?
Yes, the cable is backward compatible with DisplayPort 1.2, so it will carry 4K at 60 Hz or lower resolutions on older monitors without any configuration.
How can I confirm the cable is delivering 8K at 60 Hz after I plug it in?
Open your GPU control panel or monitor OSD and verify the active resolution reads 7680×4320 at 60 Hz; if it shows a lower mode, check that both source and display support DP 1.4 and that DSC 1.2 is enabled.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.








