We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular metal power supply unit with ventilation grille and rear connector panel

SMUGDESK

SMUGDESK 600W Power Adapter Replacement Sun Blade B2500 300-1667/300-1910/300-1630

SKU CH-FJF4-3F201

Replacement 600W power supply for Sun Blade B2500 workstations, matching original 300-1667, 300-1910 and 300-1630 part numbers with 100-240V input and full protection

  • 600 W continuous power keeps the B2500 running 24/7
  • 100–240 V universal input works worldwide without a switch
  • Direct OEM substitute matches part numbers 300-1667, 300-1910 and 300-1630
  • Original pinout and chassis size allow plug-and-play installation
  • Active PFC plus full OVP, OCP and SCP protection guards the workstation

Direct Replacement for Sun Blade B2500

This 600 W power adapter is an OEM direct substitute for the Sun Blade B2500 workstation. It matches the original pinout and chassis dimensions for plug-and-play installation without modifications. The unit cross-references part numbers 300-1667, 300-1910 and 300-1630. It is built for 24/7 workstation operation.

Universal AC Input with Active PFC

The supply accepts a universal 100-240 V AC input and uses an active PFC design for efficient power conversion. Full over-voltage, over-current and short-circuit protection circuits guard the workstation during continuous use. Rated for 600 W continuous output, it delivers stable power for daily server workloads.

Sustained 600 W Output Under Load

Under sustained load the adapter maintains its full 600 W continuous rating without derating. Protection circuits remain active during extended operation to prevent damage from voltage spikes or current surges. The design is spec-matched to the HP-W600GC3 for reliable long-term service in the Blade B2500 platform.

Highlights

  • 600 W continuous power keeps the B2500 running 24/7
  • 100–240 V universal input works worldwide without a switch
  • Direct OEM substitute matches part numbers 300-1667, 300-1910 and 300-1630
  • Original pinout and chassis size allow plug-and-play installation
  • Active PFC plus full OVP, OCP and SCP protection guards the workstation

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the SMUGDESK 600W adapter into my Sun Blade B2500 without modifying the chassis?

Align the original pinout and chassis dimensions, slide the unit into the bay until the connector seats firmly, then secure the retention screws; the plug-and-play design means no wiring or bracket changes are required.

Which components of this 600W power supply are most likely to need replacement after extended 24/7 operation?

The internal cooling fan and electrolytic capacitors are the primary wear items; active PFC and full OVP/OCP/SCP protection help extend their life, but plan to inspect the fan annually and replace capacitors if ripple increases.

At what load level does the 100-240V AC input protection typically engage during sustained maximum output?

The over-current protection (OCP) triggers if continuous draw exceeds the rated 600W, while over-voltage (OVP) and short-circuit (SCP) circuits guard the 100-240V input side against line transients.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.