We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
50cm USB 3.2 Gen 2 Type-E front panel header extension cable

SMUGDESK

SMUGDESK 50cm USB 3.2 Gen 2 Type-E Front Panel Header Extension Cable

SKU CH-46KN-7M9A2

Extends a motherboard USB 3.2 Gen 2 Type-E front-panel header by 50 cm for 10 Gbps front-panel USB-C connectivity

  • 10Gbps USB 3.2 Gen 2 bandwidth for fast peripheral data transfer
  • 50cm optimized length enables flexible internal routing in PC chassis builds
  • Shielded wiring reduces interference for stable signal transmission over distance
  • Type-E header compatibility fits standard motherboard USB 3.2 Gen 2 front-panel sockets
  • Plug-and-play design simplifies DIY desktop and compact PC assembly

What this cable is and who needs it

This SMUGDESK extension cable connects a motherboard USB 3.2 Gen 2 Type-E header to a front-panel USB-C port. It is built for DIY builders and system integrators who need to route the internal header to a chassis front panel. It is not for users whose motherboard lacks a Type-E header or who need an external USB-C cable.

The specification that decides fit

The cable uses a USB 3.2 Gen 2 Type-E interface rated for 10 Gbps data transfer. This single specification determines whether the cable matches your motherboard header and delivers full Gen 2 bandwidth to the front panel. If your board header is an older Type-A or Type-C internal connector, this cable will not fit.

Installation ease and common pitfalls

The 50 cm length allows tidy routing inside most chassis without excess slack, and the shielded wiring helps maintain signal integrity over the extension. Installation is plug-and-play: align the keyed header and press firmly until seated. The usual issue is loose seating or bent pins on the motherboard header, which causes intermittent connectivity or no device detection.

Highlights

  • 10Gbps USB 3.2 Gen 2 bandwidth for fast peripheral data transfer
  • 50cm optimized length enables flexible internal routing in PC chassis builds
  • Shielded wiring reduces interference for stable signal transmission over distance
  • Type-E header compatibility fits standard motherboard USB 3.2 Gen 2 front-panel sockets
  • Plug-and-play design simplifies DIY desktop and compact PC assembly

Specifications

No published specifications for this item yet.

Questions about this item

What does the 10Gbps rating mean when the cable is installed in a PC?

The 10Gbps rating lets a front-panel USB-C port deliver full USB 3.2 Gen 2 bandwidth to connected peripherals, so external SSDs or docks can reach their rated transfer speeds instead of falling back to 5Gbps.

Which motherboard header standard does the Type-E connector match, and what speed ceiling does it impose?

The Type-E plug fits the standard USB 3.2 Gen 2 front-panel header on modern motherboards, capping the link at 10Gbps — the maximum the header specification allows.

What clearance and mounting points are needed to route the 50cm cable inside a case?

The 50cm length reaches from a bottom-mounted header to top or front panel ports in most ATX and ITX chassis, and the plug bodies are sized for standard header cut-outs without extra brackets.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.