SMUGDESK 50cm Slimline SAS 4.0 SFF8654 8i 74Pin to 8 SATA 7Pin Fanout Cable

Slimline SAS 4.0 1-to-8 Fanout Cable

This SMUGDESK cable converts a single SFF8654 8i 74Pin Slimline SAS 4.0 host port into eight SATA 7Pin target connections. It is built for RAID controllers and host bus adapters that need to expand one port into multiple drive links. The 50cm length suits internal routing in standard rackmount servers and dense storage enclosures. Shielded wiring aims to reduce crosstalk for reliable data-centre operation.

RAID Controllers Needing Multidrive SATA Expansion

The cable suits administrators adding eight SATA hard disks or SSDs to a single Slimline SAS 4.0 port on a RAID card or motherboard header. It fits enterprise storage arrays, high-density backplanes and large-scale NAS deployments where a 1-to-8 breakout is required. Builders who need a different host connector, a different target interface, or a cable that aggregates multiple host ports should look elsewhere. The product addresses only the specific SFF8654-to-eight-SATA topology described in the specifications.

SFF8654 8i 74Pin to Eight SATA 7Pin Topology

The decisive specification is the 1-to-8 fanout from a single SFF8654 8i 74Pin Slimline SAS 4.0 host interface to eight separate SATA 7Pin target ports. This exact connector mapping and lane split determines whether the cable matches the controller port and the backplane or drive cage in use. Verify that the host side presents an 8i 74Pin Slimline SAS 4.0 receptacle and that the target side requires eight individual SATA 7Pin connections before purchasing.