We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with M.2 and mSATA slots and SATA connectors

SMUGDESK

SMUGDESK 3in1 M.2 NVMe PCIe x16, M.2 SATA & mSATA to SATA 3.0 Adapter

SKU CH-HHHR-NCR73

A three-mode adapter that lets you install one M.2 NVMe, M.2 SATA or mSATA SSD into a desktop PC via PCIe x16 or SATA 3.0

  • Supports three SSD types on one card
  • NVMe drives reach full speed via PCIe x16 slot
  • SATA and mSATA SSDs connect as standard SATA 3.0 drives
  • Reuses existing SSDs to add desktop storage
  • Works driver-free on Windows and Linux

Three-mode SSD adapter for desktop upgrades

This single circuit board accepts M.2 NVMe MKey, M.2 SATA BKey and mSATA solid-state drives, letting you reuse idle SSDs on a desktop motherboard. It targets DIY builders, data-recovery technicians and anyone building low-cost local storage pools without buying new drives.

NVMe path needs PCIe slot with NVMe support

When an M.2 NVMe drive is fitted, the adapter routes its signal through a motherboard PCIe x16 slot to deliver full NVMe read-write performance; the slot must provide NVMe protocol support or the drive will not function. M.2 SATA and mSATA modes instead rely on standard SATA 3.0 channels from the mainboard and require a SATA data cable plus SATA power from the PC supply.

Only one drive operates at a time

The adapter supports exactly one installed SSD at any moment; simultaneous multi-drive operation is not supported, so you must choose which drive to use before powering on.

Highlights

  • Supports three SSD types on one card
  • NVMe drives reach full speed via PCIe x16 slot
  • SATA and mSATA SSDs connect as standard SATA 3.0 drives
  • Reuses existing SSDs to add desktop storage
  • Works driver-free on Windows and Linux

Specifications

No published specifications for this item yet.

Questions about this item

Should I pick the NVMe, SATA or mSATA slot for my drive?

The board has one M.2 NVMe M‑Key slot, one M.2 SATA B‑Key slot and one mSATA slot. Install only the SSD type that matches your drive's key; only one drive works at a time.

Will an NVMe SSD run at full speed through the PCIe x16 slot?

The adapter routes the NVMe signal through a PCIe x16 slot so the drive keeps its native NVMe read‑write performance, provided the motherboard slot supports the NVMe protocol.

What does the SATA 3.0 interface cap at for the SATA and mSATA modes?

In SATA or mSATA mode the adapter outputs a standard SATA 3.0 signal, so throughput is limited to the SATA 3.0 ceiling.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.