We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black SATA power splitter cables, each with one 15-pin male plug branching to five female connectors, 500mm long

SMUGDESK

SMUGDESK 2Pack SATA Power Splitter Cable 15Pin Male to 5×Female 500mm Black

SKU CH-7KV5-23PF1

Two 15-pin SATA male-to-5×female splitter cables, 500 mm each, power up to five drives per cord from a single PSU connector

  • One male input powers five drives
  • 500mm length simplifies internal cable routing
  • Two cables included for multi-drive builds
  • Standard 15pin SATA connectors fit HDDs, SSDs and optical drives
  • Durable black jacket with moulded connectors ensures stable power delivery

Splitter Cable for Multi-Drive Builds

This two-pack of SATA power splitter cables lets you run up to five drives from a single 15pin SATA power connector on your supply. Each cord carries one male input that branches to five female outputs, so a pair handles ten devices total. The design targets desktop builders adding multiple hard disks, solid-state drives or optical units without open power leads. It suits anyone expanding internal storage in a standard PC chassis.

Flexible 500mm Length Aids Routing

At 500mm or 19.7in, the black jacketed cables reach across full-size and mid-tower cases without pulling tight on connectors. The moulded 15pin housings seat firmly to reduce loose-connection risk, while the supple outer sheath resists abrasion during routing behind motherboard trays or through drive cages. Standard SATA power terminals ensure compatibility with HDDs, SSDs and optical drives alike. Having a spare cable in the pack simplifies future upgrades or RAID rebuilds.

Verify Supply Capacity Before Connecting

Confirm that your power supply delivers enough total wattage and current on the SATA rail before loading five drives onto one lead. Overloading a single channel can cause instability or damage, so check the unit's specifications for per-cable limits. The splitter itself passes power through without regulation, so the source must handle the combined draw of every attached device. Ensure physical clearance for the branched connectors inside your case layout.

Highlights

  • One male input powers five drives
  • 500mm length simplifies internal cable routing
  • Two cables included for multi-drive builds
  • Standard 15pin SATA connectors fit HDDs, SSDs and optical drives
  • Durable black jacket with moulded connectors ensures stable power delivery

Specifications

No published specifications for this item yet.

Questions about this item

What does the 15-pin SATA power splitter cap in practice?

The 15-pin SATA male input splits to five female ports, letting you power up to five drives from one PSU connector. Total current stays limited to that single rail, so confirm your supply can handle the combined load.

What clearance does the 500 mm cable need to fit?

At 500 mm (19.7 in) the cable reaches across full-size and mid-tower cases, giving enough slack for tidy routing behind motherboard trays and around drive cages without pulling on connectors.

How do you install the splitter, and what step causes problems?

Plug the male end into a free SATA power lead from the PSU, then attach each drive to a female port. The common mistake is adding too many drives and exceeding the PSU rail’s current limit, causing instability.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.