We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black plastic 3.5 inch drive caddies with metal connectors and release levers

SMUGDESK

SMUGDESK 2Pack 3.5" SAS/SATA Drive Caddy 651314001 Gen8/9

SKU CH-WBTH-Z8Q74

Holds 3.5" SAS/SATA drives in HP ProLiant Gen8 and Gen9 servers with a two-caddy set for RAID or replacement

  • Exact OEM match to part 651314001 for Gen8/Gen9 servers
  • Fits blade and rack models including 460c, 465c, 660c, 160, 180, 360, 380, 350, 560
  • Securely holds 3.5 inch SAS/SATA HDD and SSD drives
  • Two caddies enable batch expansion and RAID array deployment
  • Precision-built bracket installs directly without modification required

Exact OEM Replacement 651314001

This two-pack of 3.5-inch drive caddies matches HP part number 651314001 for ProLiant Gen8 and Gen9 servers. It accepts 3.5-inch SAS and SATA hard drives or SSDs. The brackets suit blade models BL460c, BL465c and BL660c plus rackmount models DL160, DL180, DL360, DL360e, DL380, DL380p, DL560, ML350 and ML350p. Administrators expanding storage or building RAID arrays use these trays for quick, reliable drive swaps.

Upgrade From Missing Or Damaged Trays

The caddies replace lost, cracked or bent original brackets that prevent drives from seating properly. They also serve when adding new drives to empty bays during capacity expansion or RAID rebuilds. The jump is worth it when a server shows drive-detection errors caused by a faulty tray or when a maintenance window demands spare trays on hand for immediate hot-swap replacement.

Plug-And-Play Installation

Each tray slides into the server bay until the latch clicks, requiring no tools or firmware updates. Drives mount with the screws supplied by the original system. The most common issue is forgetting to fully engage the release lever, which leaves the drive unseated and invisible to the controller. Another frequent problem is reusing worn drive screws that strip the tray threads, so fresh screws are recommended for long-term reliability.

Highlights

  • Exact OEM match to part 651314001 for Gen8/Gen9 servers
  • Fits blade and rack models including 460c, 465c, 660c, 160, 180, 360, 380, 350, 560
  • Securely holds 3.5 inch SAS/SATA HDD and SSD drives
  • Two caddies enable batch expansion and RAID array deployment
  • Precision-built bracket installs directly without modification required

Specifications

No published specifications for this item yet.

Questions about this item

Will the 651314001 caddy fit a DL360 Gen9 server bay?

Yes, the 651314001 caddy is an exact OEM replacement for HP ProLiant Gen8 and Gen9 servers, including the DL360, DL380, DL160, DL180, DL560, ML350, BL460c, BL465c and BL660c series listed.

How do I install a 3.5inch drive into the 651314001 tray without damaging the connector?

Slide the 3.5inch SAS or SATA drive into the tray until the drive connector seats firmly on the tray backplane, then secure the drive with the four side screws before inserting the assembly into the server bay until it clicks.

What maintenance will the 651314001 caddies need after deployment in a RAID array?

The caddies themselves require no scheduled maintenance; monitor drive health via the server management console and replace only the 3.5inch SAS or SATA drive inside the tray if a failure occurs.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.