We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two metal 2.5-inch drive caddies for HP servers

SMUGDESK

SMUGDESK 2Pack 2.5" Hard Drive Tray Caddy 651687001 651699001

SKU CH-E8BD-8JTE0

Two-bay metal caddy mounts 2.5" SAS/SATA drives in HP ProLiant Gen8 and Gen9 servers matching part numbers 651687001 and 651699001

  • Cost-effective multi-drive upgrades with 2-pack value bundle
  • Plug-and-play installation matching HP part numbers 651687001 & 651699001
  • Fits HP ProLiant DL320e DL360e DL360p DL380e DL380p DL385p DL560 ML310e DL380 DL350 DL360 servers
  • Supports 2.5" SAS SATA SSDs and HDDs for enterprise storage expansion
  • Vibration-resistant metal build ensures stable long-term datacenter operation

2-Pack 2.5" Drive Caddies for HP ProLiant Servers

This twin-pack provides two metal trays that mount 2.5-inch SAS or SATA drives into compatible HP ProLiant Gen8 and Gen9 rack and tower servers. It is aimed at administrators performing multi-drive upgrades, RAID array expansion or keeping spare caddies on hand for rapid replacement.

OEM Part-Number Match Limits Compatibility

Each tray is built to match HP part numbers 651687001 and 651699001, so installation is plug-and-play only on servers that accept those exact part numbers. The caddies will not fit systems that require a different carrier design or a 3.5-inch form factor.

Supports Standard 2.5" SAS and SATA Drives

The bracket accepts any enterprise 2.5-inch SAS or SATA hard drive or solid-state drive. Drives using other interfaces or physical sizes cannot be secured in these trays.

Highlights

  • Cost-effective multi-drive upgrades with 2-pack value bundle
  • Plug-and-play installation matching HP part numbers 651687001 & 651699001
  • Fits HP ProLiant DL320e DL360e DL360p DL380e DL380p DL385p DL560 ML310e DL380 DL350 DL360 servers
  • Supports 2.5" SAS SATA SSDs and HDDs for enterprise storage expansion
  • Vibration-resistant metal build ensures stable long-term datacenter operation

Specifications

No published specifications for this item yet.

Questions about this item

Should I buy the 2-pack or look for single trays?

The 2-pack matches both HP part numbers 651687001 and 651699001, giving you spares for multi-drive upgrades or RAID expansion in one purchase.

Will these trays handle the speed of my SAS or SATA SSDs once installed in a ProLiant?

The caddies are passive metal brackets; they add no latency or bandwidth limit, so your drives run at the full SAS or SATA rate the server backplane provides.

Do the trays use a specific drive interface or connector standard?

They accept any standard 2.5-inch SAS or SATA drive and slide directly into the hot-plug bays of compatible Gen8 and Gen9 ProLiant servers.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.