SMUGDESK
SMUGDESK 2Pack 15Pin SATA to 4Port SATA Power Splitter Cable 18 Inches
Two cables each split one 15-pin SATA power connector into four female ports, spaced 4.5 inches apart along an 18-inch length for flexible multi-drive wiring
- Converts one 15pin SATA port into four power outputs
- 18inch cable with 4.5inch spacing suits multi-drive chassis
- 18AWG copper conductors ensure stable power delivery
- Positive-lock latching prevents vibration-induced connection loss
- Cost-effective expansion avoids PSU upgrade for added drives
Two-pack SATA power splitter
This two-pack of SATA power splitter cables turns each 15-pin SATA male connector from a power supply into four SATA female outputs. The design lets builders run up to four SATA drives from a single PSU connector without upgrading the unit.
Builders adding multiple drives
The splitters suit anyone expanding storage with mechanical hard drives, solid-state drives or optical drives in a desktop chassis. Systems that already lack spare SATA power headers or that need power for non-SATA devices will not benefit from these cables.
18-inch length with 4.5-inch spacing
Each cable measures 18 inches overall and spaces its four female ports 4.5 inches apart, giving enough reach for ATX, micro-ATX and larger tower layouts while keeping cable runs tidy.
Highlights
- Converts one 15pin SATA port into four power outputs
- 18inch cable with 4.5inch spacing suits multi-drive chassis
- 18AWG copper conductors ensure stable power delivery
- Positive-lock latching prevents vibration-induced connection loss
- Cost-effective expansion avoids PSU upgrade for added drives
Specifications
No published specifications for this item yet.
Questions about this item
How much space does the 18 inch cable with 4.5 inch connector spacing need inside the case?
The 18 inch cable has four female connectors spaced 4.5 inches apart, so measure your drive bay layout to ensure the first and last devices fall within that total reach.
What is the correct way to seat the positive lock connectors so they do not come loose?
Push each 15 pin SATA plug straight in until the latch clicks audibly; angled insertion can leave the latch partially engaged and cause intermittent power under vibration.
When should the 18 AWG splitter be replaced to avoid power issues?
Replace the cable if any connector shows melted plastic, corroded pins, or if drives randomly disappear under load, indicating the copper conductors or latch mechanism have degraded.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



