We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

SMUGDESK

SMUGDESK 260W Platinum power adapter L70041-001 for HP ProDesk 600 G6 400 G7 480 G7 MT

SKU CH-STX4-J6JM8

260W Platinum 80 PLUS power supply replaces L70041-001 in HP ProDesk 600 G6, 400 G7 and 480 G7 MT desktops

  • OEM exact replacement for HP ProDesk 600 G6, 400 G7, 480 G7 MT
  • 260 W continuous output with 80 PLUS Platinum efficiency up to 92 % at 50 % load
  • Universal 100 V–240 V AC input with active PFC for global office use
  • Built-in OVP, OCP, UVP, SCP protection safeguards motherboard, CPU and storage
  • Standard OEM dimensions and fixed harness enable plug-and-play swap without chassis modification

OEM replacement for HP ProDesk MT

This SMUGDESK power adapter is an exact OEM replacement for the Lite-On L70041-001 unit found in HP ProDesk 600 G6, 400 G7 and 480 G7 MT desktops. It matches the original pin definition and chassis dimensions for a direct plug-and-play swap. The unit is built for stable 24/7 office operation and suits IT teams maintaining fleets of these business towers. It is not for builders needing higher wattage for discrete graphics upgrades.

80 PLUS Platinum efficiency and active PFC

Rated at 260W continuous output, the supply meets 80 PLUS Platinum certification with up to 92% efficiency at 50% load, reducing power draw and heat generation. A universal 100V-240V 50/60Hz input with active PFC ensures stable running across global office power grids. Built-in OVP, OCP, UVP and SCP protection safeguards the motherboard, CPU and storage from surge damage during normal use.

Full aging test validates sustained 260W delivery

Every unit undergoes a full aging test before shipment to verify stable long-term performance under continuous load rather than short bursts. The fixed wiring harness and standard OEM form factor maintain consistent thermal behaviour inside the original ProDesk MT chassis. This makes it a reliable spare for repairing faulty stock units in deployed business desktops.

Highlights

  • OEM exact replacement for HP ProDesk 600 G6, 400 G7, 480 G7 MT
  • 260 W continuous output with 80 PLUS Platinum efficiency up to 92 % at 50 % load
  • Universal 100 V–240 V AC input with active PFC for global office use
  • Built-in OVP, OCP, UVP, SCP protection safeguards motherboard, CPU and storage
  • Standard OEM dimensions and fixed harness enable plug-and-play swap without chassis modification

Specifications

No published specifications for this item yet.

Questions about this item

How do I install this 260W Platinum PSU in my HP ProDesk 600 G6 MT, and what step do people get wrong?

Remove the side panel, unplug the old unit’s fixed harness from the motherboard and drives, swap the PSU using the original chassis screws, then reconnect every connector — the step often missed is seating the 24-pin ATX plug fully until it clicks.

What maintenance or replacement will this L70041-001 power supply need later?

The internal fan is the only moving part; clean dust from the intake grille every 6-12 months with compressed air, and replace the whole unit if the fan becomes noisy or the system shuts down under load.

What limit shows up first under sustained use of this 260W Platinum adapter?

Continuous output is capped at 260W; exceeding that trips the over-current protection and shuts the PSU down, so the power ceiling is the first hard limit you will hit.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.