SMUGDESK
SMUGDESK 25cm 90° DownAngled USB 3.0 to Micro USB 3.0 Panel Cable with Locking Screw
A 25cm panel-mount cable with a 90° down-angled Micro USB 3.0 connector, locking screw and 5Gbps data transfer for vibration-resistant embedded installs
- Space-saving panel fit from 90° down-angled connector
- Vibration-proof link secured by locking screw
- Fast 5Gbps transfers via USB 3.0 interface
- Compact 25cm length suits tight chassis builds
- Heavy-duty construction endures continuous industrial use
Compact Panel Cable for Embedded Builds
This 25 centimetre panel‑mount cable links a USB 3.0 host to a Micro USB 3.0 device using a 90° down‑angled connector. It is designed for installers who need a short, fixed run inside compact chassis, industrial enclosures or surveillance housings where straight plugs would foul neighbouring components.
Low‑Profile Locking Connector
The downward bend keeps the cable close to the panel surface, freeing space behind the mount. A captive locking screw secures the Micro USB 3.0 plug so it cannot back out under vibration or repeated thermal cycling, while the reinforced jacket and strain‑relieved ends withstand continuous heavy‑duty handling.
Stable 5 Gbps Link with Minimal Power Overhead
USB 3.0 signalling delivers up to 5 Gbps throughput for large‑file transfers without active electronics that would add heat or noise. The short length and passive construction keep voltage drop negligible, so the link stays reliable in embedded systems that run continuously on limited power budgets.
Highlights
- Space-saving panel fit from 90° down-angled connector
- Vibration-proof link secured by locking screw
- Fast 5Gbps transfers via USB 3.0 interface
- Compact 25cm length suits tight chassis builds
- Heavy-duty construction endures continuous industrial use
Specifications
No published specifications for this item yet.
Questions about this item
Does the USB 3.0 interface deliver the full 5Gbps bandwidth in practice?
The cable is rated for USB 3.0 5Gbps transfer speed, so it will sustain that bandwidth provided the host controller and connected device both support USB 3.0.
What panel cut-out and clearance does the 90° down-angled Micro USB 3.0 connector need?
The connector requires a standard Micro USB 3.0 panel opening and enough depth behind the panel for the 90° downward bend, which keeps the cable close to the chassis surface.
How do I secure the locking screw correctly during installation?
Align the Micro USB 3.0 plug, seat it fully, then tighten the captive locking screw by hand until snug; the screw prevents the connector from backing out under vibration.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



