We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with twenty black SATA ports along one edge and a gold PCIe connector

SMUGDESK

SMUGDESK 20 Port PCIe to SATA 3.0 Expansion Card

SKU CH-76DJ-036E3

Adds twenty SATA 3.0 ports with port multiplier for large storage expansion at 6Gbps

  • Add 20 SATA 3.0 ports for massive storage growth
  • Port multiplier enables many drives per connection
  • 6Gbps speed keeps HDD and SSD transfers fast
  • Bootable design lets you install the OS on added drives
  • Driver-free plug & play works in PC, workstation or server

20-Port SATA 3.0 Expansion

This SMUGDESK adapter adds twenty SATA 3.0 ports through a single PCIe slot using port multiplier technology. Each port delivers 6Gbps transfer speed for hard drives or solid state drives. The card supports system booting so it can host an operating system drive. It targets desktop, workstation and server builds that need dense storage expansion without additional controllers.

Driver-Free Installation

The card works plug and play with no driver installation required on supported operating systems. Simply insert it into an available PCIe slot and connect the drives. The main difficulty arises when the motherboard BIOS does not recognise the port multiplier, leaving some drives invisible during POST. Another common issue is insufficient power from the slot alone, which can cause drives to spin down under load.

Verify Slot and Power

Confirm that your motherboard has a free PCIe slot with enough physical clearance for the card bracket. Check that the system power supply provides enough spare SATA power connectors for every drive you intend to attach. Ensure the BIOS version supports booting from a port-multiplier SATA controller if you plan to use a drive on this card as the system volume.

Highlights

  • Add 20 SATA 3.0 ports for massive storage growth
  • Port multiplier enables many drives per connection
  • 6Gbps speed keeps HDD and SSD transfers fast
  • Bootable design lets you install the OS on added drives
  • Driver-free plug & play works in PC, workstation or server

Specifications

No published specifications for this item yet.

Questions about this item

How do I verify the 20 SATA 3.0 ports are all detected after installation?

Open your BIOS or operating system disk management and confirm all connected drives appear; each port should show a device at 6Gbps link speed.

What comes in the box and which cables must I buy separately?

The card itself is included; you will need standard SATA data cables for each drive and a power cable from your PSU to the card if it requires auxiliary power.

Which version of this card should I choose for a server needing bootable storage?

This model supports system boot on any of its 20 SATA 3.0 ports, making it suitable for server boot drives without a specific version selection.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.