We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two 30 cm USB 2.0 Type-C male to 5-pin screw terminal block cables with shielded connectors

SMUGDESK

SMUGDESK 2 Pack 30 cm USB 2.0 Type-C Male to 5 Pin Screw Terminal Block Cable

SKU CH-7SFG-V1PX5

Two 30 cm USB 2.0 Type-C to 5-pin screw terminal cables enable solder-free wiring for power and data projects

  • Two cables included for multiple DIY projects
  • USB 2.0 Type-C plug delivers 5V power and data
  • Screw-lock terminals secure wires without soldering
  • Five labelled pins simplify power, data and shield wiring
  • 30 cm flexible cable fits tight embedded spaces

Dual 30 cm USB-C screw terminal cables

This pack contains two thirty-centimeter USB 2.0 Type-C male to five-pin pluggable screw terminal block adapter cables. They are intended for electronic maintenance technicians, Arduino and Raspberry Pi developers, circuit DIY enthusiasts and industrial small equipment power conversion. The standard Type-C plug draws stable 5V DC power and supports basic two-way data communication from adapters, power banks or motherboard ports.

Sustained connection reliability without soldering

The detachable five-position screw terminal block uses independent shielding terminals and bolt locking to secure stripped wire ends firmly. This design eliminates the soldering process, avoiding cold joints and short-circuit risks while maintaining consistent contact during prolonged operation. Each terminal corresponds to positive power, negative power, D+/D- data lines and a shielding ground pin for clear signal classification.

Shielded construction for stable power and data

The reserved shielding terminal connects equipment chassis to ground, restraining electromagnetic interference during normal use. Compact flexible cable bodies suit embedded circuits, power modules and electronic equipment modification without adding bulk. Pluggable terminals simplify maintenance and rewiring compared to permanent soldered joints.

Highlights

  • Two cables included for multiple DIY projects
  • USB 2.0 Type-C plug delivers 5V power and data
  • Screw-lock terminals secure wires without soldering
  • Five labelled pins simplify power, data and shield wiring
  • 30 cm flexible cable fits tight embedded spaces

Specifications

No published specifications for this item yet.

Questions about this item

Does the 30 cm cable generate noticeable heat when supplying 5 V power continuously?

The cable is rated for USB 2.0 Type-C 5 V power delivery and basic data transmission; its compact flexible body is designed for embedded circuits and small equipment, so heat remains minimal during typical all-day use.

What type of USB host port do I need to plug the Type-C male end into for power and data?

A standard USB 2.0 Type-C female port — such as those on power adapters, power banks, motherboard headers or charging modules — provides the 5 V supply and two-way data path required by the adapter.

Can I connect the 5-pin screw terminals to an older microcontroller board that only has bare header pins for power and data?

Yes. Strip the wires, insert them into the five independent terminals — positive, negative, D+, D- and shield — and tighten the bolts; the pluggable block gives a secure soldering-free connection to legacy pin headers.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.