SMUGDESK
SMUGDESK 1x 8Pin to 3x 6+2Pin GPU Power Splitter Cord 12AWG+18AWG 50cm+20cm
Splits one 8-pin connector into three 6+2-pin outputs using 12AWG main and 18AWG branch wires with 50cm and 20cm lengths for multi-GPU mining rigs
- One 8-pin input powers three graphics cards
- 12AWG main wire plus 18AWG branches handle heavy mining loads
- 50 cm main cable and 20 cm branches fit standard mining frames
- 6+2Pin detachable connectors fit both 6-pin and 8-pin GPU ports
- Heavy-duty insulation and locked plugs resist vibration and heat
Power Splitter for Multi-GPU Rigs
This cable splits a single 8Pin PSU connector into three 6+2Pin outputs so multiple graphics cards can draw power from one modular cable. It is built for mining rigs and other multi-GPU systems that need extra GPU power ports without adding more PSU cables.
Check PSU Capacity and Connector Type
Verify that your power supply has a free 8Pin PCIe modular port rated for the combined draw of all attached cards. The load is shared across the three branches, so the PSU rail must handle the total current without exceeding the cable's maximum rating. Only use this splitter with matching modular supplies.
12AWG Main Wire and 18AWG Branches Reduce Voltage
The thicker 12AWG main segment and 18AWG branch wires lower resistance under sustained high loads, limiting heat buildup during continuous mining operation. The 6+2Pin detachable tips fit both 6Pin and 8Pin GPU sockets, while the 50cm main plus 20cm branch lengths keep wiring tidy inside standard mining frames.
Highlights
- One 8-pin input powers three graphics cards
- 12AWG main wire plus 18AWG branches handle heavy mining loads
- 50 cm main cable and 20 cm branches fit standard mining frames
- 6+2Pin detachable connectors fit both 6-pin and 8-pin GPU ports
- Heavy-duty insulation and locked plugs resist vibration and heat
Specifications
No published specifications for this item yet.
Questions about this item
Does the package include only the 8Pin-to-triple-6+2Pin splitter cable, or are extra PSU cables or adapters supplied?
The box contains the single 1x 8Pin to 3x 6+2Pin splitter cord with a 50cm main segment and 20cm branches; no additional PSU cables or adapters are included.
Should I use the 6+2Pin connectors as 6-pin or 8-pin plugs for my graphics cards?
Each output is a detachable 6+2Pin design, so you can separate the 2-pin section for 6-pin ports or keep it attached for full 8-pin GPU power sockets.
How does the 12AWG main wire and 18AWG branch wiring affect power delivery to three cards?
The 12AWG main conductor handles the combined load with low resistance, while the 18AWG branches feed each GPU; total current must stay within the PSU and cable ratings to avoid overheating.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115324BTC
In stock
